喜歡就充值下載吧。。。資源目錄里展示的全都有，，下載后全都有，，有疑問咨詢QQ:3278627871
摘 要
本次設計內容涉及了機械制造工藝及機床夾具設計、金屬切削機床、公差配合與測量等多方面的知識。
箱體零件的工藝規程及其鉆、攻工件左端面6-M4深8孔深10螺紋的工裝夾具設計是包括零件加工的工藝設計、工序設計以及專用夾具的設計三部分。在工藝設計中要首先對零件進行分析，了解零件的工藝再設計出毛坯的結構，并選擇好零件的加工基準，設計出零件的工藝路線；接著對零件各個工步的工序進行尺寸計算，關鍵是決定出各個工序的工藝裝備及切削用量；然后進行專用夾具的設計，選擇設計出夾具的各個組成部件，如定位元件、夾緊元件、引導元件、夾具體與機床的連接部件以及其它部件；計算出夾具定位時產生的定位誤差，分析夾具結構的合理性與不足之處，并在以后設計中注意改進。
關鍵詞:工藝、工序、切削用量、夾緊、定位、誤差。
沈陽理工大學應用技術學院畢業設計說明書
Abstract
This design involves the machinery manufacturing process and fixture design, metal cutting machine tool, tolerance and measurement and other aspects of knowledge.
The part of the process and its drilling, tapping the left end surface of 6-M4 8 deep hole depth 10 threaded fixture design is including machining process design, process design and fixture design in three parts. In the process of design should first of all parts for analysis, to understand the parts of the process to design blank structure, and choose the good parts machining datum, design a part of the process route; then the parts of each step of the process dimension calculation, is the key to determine the process equipment and cutting the amount of each working procedure design; then the special fixture fixture design, selection of the various components, such as the connecting part positioning element, clamping elements, guiding elements, fixture and machine tools and other components; the positioning errors calculated fixture positioning, analysis the rationality and shortcoming of the fixture structure, pay attention to improve and design in later.
Keyword: Technology, process, cutting dosage, clamping, positioning, error.
目 錄
摘要···········································································································································Ⅰ
Abstract························································································································Ⅱ
緒論·············································································································································1
1概述發展·································································································································2
1.1 機床夾具簡介·················································································································2
1.1.1 機床夾具的主要功能···································································································2
1.1.2 機床夾具的組成···········································································································2
1.1.3 夾具設計的步驟和基本要求·······················································································2
2箱體的機械加工工藝規程······································································································9
2.1 毛坯的制造形式···········································································································9
2.2 零件的分析····················································································································9
2.3 基面的選擇··················································································································11
2.3.1 粗基準的選擇原則····································································································11
2.3.2 精基準的選擇原則·····································································································12
2.4 制訂工藝路線··············································································································12
2.5 確定切削用量及基本工時··························································································13
3 箱體的夾具設計···················································································································47
3.1 問題的提出····················································································································47
3.2 夾具的工作原理············································································································47
3.3 鉆套的設計····················································································································48
總結···········································································································································49
致謝···········································································································································50
參考文獻···································································································································51
IV