自行走輪椅(全套含cad圖),行走,輪椅,全套,cad 自動走輪椅 學生姓名:梁 超 班級:0681053 指導老師:袁 坤 摘要:為實現高性能和低成本的自行走輪椅, 開發了全數字自行走輪椅控制器; 采用先進的無速度傳感器測速技術, 設計了帶電流補償?shù)碾妷贺?fù)反饋加負載不平衡補償?shù)碾p電機協調控制方案。驅動部分采用有刷幅條電機的后輪驅動。幅條電機傳動具有轉矩大、噪音低、效率高、耗電少、壽命長、綠色環保等優點，克服了鏈傳動噪聲大、沖擊大、傳動不平穩等缺點，且外觀新穎，控制部分采用采用平等四邊形連桿機構，結構簡單，并實現了大角度的轉向控制和兩輪同步運動，同時增加輪椅在行進中的穩定性，而且起到防倒的功能，遇上下坡也能自主掌控，安全性高；制動部分采用特制的漲剎機構，達到前后手柄都可以制動，安全性高。 給出了軟硬件結構和單元電路的設計及參數選擇方法; 分析了操縱桿工作原理; 給出了輪椅速度和運動方向信息合成計算公式和提高運行舒適度的S曲線生成策略。 關鍵詞: 自行走輪椅; 控制器; 雙電機; 協調控制; S曲線; 誤差檢測；幅條電機；連桿機構；漲剎機構；電動控制；輔助裝置 指導老師簽名: Automatic walk a wheelchair Student name :Liang Chao Class: 0681053 Supervisor: Yuan Kun Abstract: To achieve high performance and low cost to walk the wheelchair, developed by digital controller; walk wheelchairs, Using advanced speed sensorless speed technology, design with the current compensation voltage feedback and compensation of unbalanced load motor coordination control scheme. Driving part adopts a brush painting of the rear wheel drive motor. The picture has great torque motor drive, low noise, high efficiency, energy saving.longlife, green environmental protection etc, and overcome the impact noise, large chain drive not smooth, novel appearance and defects, and control part adopts USES equal quadrilateral linkage mechanism, simple structure, and realize the large Angle of steering control and two wheels, adding wheelchairs synchronous movement in the stability and travel, prevent fall function, meets the downhill can independently control, high security, Braking part adopts special rose, and brake to handle all can apply the brake, high safety. The hardware and software structure and given the unit circuit design and parameter selection method, The lever principle analysis, Given the speed and direction of movement wheelchair synthetic formulas and improve information generated the comfort of the S curve operation strategy. Key Words: EPW; Controller; Two2motor; Coordinated control; S curve; Fault detection；electromotive wheelchair；hand control；electric control；auxiliary unit Signature of Supervisor: