喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:1304139763或 1064457796】
============================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:1304139763或 1064457796】
============================================
摘 要
隨著汽車工業的蓬勃發展，對汽車及其零部件的安全可靠性要求也就不斷發展提高，作為汽車發動機的心臟部件油泵，一旦出現故障，輕則造成汽車拋錨，重則造成車毀人亡，給人類的生命財產帶來嚴重的危害。而齒輪油泵軸的斷裂又是油泵最容易失效的方式之一。近幾年來，隨著油泵凸端噴射壓力不斷提高，軸斷裂現象更為頻繁發生，不僅給油泵生產廠商帶來巨大的經濟損失，還嚴重地?fù)p害了油泵生產廠商的社會信譽。因此盡快找出軸斷裂的原因并提出相應的改進措施迫在眉睫，具有重要的經濟效益及社會效應。本課題就是分析研究齒輪油泵軸斷裂失效的原因并提出了對策。
關鍵詞：軸，表面涂防,斷裂分析，網狀碳化物，疲勞強度，
Abstract
With the vigorous development of the automobile industry, the security and reliability requirements for motor vehicles and parts will continue development to improve the event of a failure, as the heart of the automotive engine parts oil pump, ranging from causing the car broke down, while causing a fatal car crashbring serious harm to human life and property. Gear oil pump shaft fracture is one of the oil pump most likely to fail. In recent years, with the end of the injection pressure of the oil pump convex and continuously improve, shaft breakage more frequently, not only bring huge economic losses to the oil pump manufacturers, also severely damaged the social reputation of the oil pump manufacturers. Therefore, as soon as possible to identify the reasons for shaft fracture and put forward the corresponding measures for improvement is imminent, with important economic and social effects. This topic is of Fracture Failure Analysis of gear oil pump shaft and proposed countermeasures.
【Key word】Axis；Surface coated with anti-axis；Fracture Analysis；Carbide network；Fatigue strength
目 錄
摘 要 I
Abstract II
目 錄 III
第1章 緒論 1
1.1本次畢業設計的意義 1
1.2油泵的發展歷史及國內外現狀 2
1.3油泵系統 3
第2章 齒輪泵簡介 5
2.1齒輪泵的工作原理 5
2.2齒輪泵的結構特點 6
第3章 齒輪軸結構分析 7
3.1齒輪泵的結構及工況 7
3.2齒輪軸的技術條件 8
3.3小結 11
第4章 應力分析 12
4.1強度校核原始條件 12
4.2齒輪軸扭矩計算 12
4.3彎矩的計算 15
4.4危險截面應力的計算 16
4.5安全系數校核 19
4.6小結 20
第5章 齒輪軸設計的改進措施 21
5.1設計改進 21
5.2提高冷加工質量 21
5.3材料選用改進 22
5.4改進熱處理工藝 23
5.5小結 23
總 結 24
參考文獻 25
III