喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有,,請放心下載,,文件全都包含在內,,【有疑問咨詢QQ:414951605 或 1304139763】
==========================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有,,請放心下載,,文件全都包含在內,,【有疑問咨詢QQ:414951605 或 1304139763】
==========================================
哈爾濱工業大學華德應用技術學院畢業設計(論文)
摘 要
無級變速器特點是采用傳動帶和工作直徑可變的主、從動輪相配合傳遞動力。由于無級變速器可以實現傳動比的連續改變,從而得到傳動系與發動機工況的最佳匹配,提高整車的燃油經濟性和動力性,改善駕駛員的操縱方便性和乘員的乘坐舒適性,所以它是理想的汽車傳動裝置。無級變速系統主要包括主動輪組、從動輪組、金屬帶(關鍵所在)和液壓泵等基本部件。 主動輪組和從動輪組都由可動盤和固定盤組成,與油缸結合的一側帶輪軸向滑動,另一側則固定。可動盤與固定盤都是錐面結構,它們的錐面形成V型槽與V型金屬帶嚙合。發動機輸出軸輸出的動力首先傳遞到無級變速器的主動輪,然后通過V型傳動帶傳遞到從動輪,最后經減速器、差速器傳遞給驅動輪。工作時通過主動輪與從動輪的可動盤作軸向移動來改變主動輪、從動輪錐面與V型傳動帶嚙合的工作半徑,從而改變傳動比。可動盤的軸向移動量是由駕駛者根據需要通過控制系統調節主動輪、從動輪液壓泵油缸壓力來實現的。本設計旨在通過對金屬帶式無極變速器的研究,找到可循的改良方案?! ?
關鍵詞 無級變速器;金屬帶式無極變速器;無級變速器設計
Abstract
Characteristics of continuously variable transmission belts and work with a diameter of variable from the wheel fit transfer of power. Due to the continuous change of continuously variable transmission can implement the ratio in order to get the best match of transmission and engine condition, improving vehicle fuel economy and power, improve the operating convenience of drivers and passengers riding comfort, it is an ideal vehicle transmission device. Continuously variable transmission system which includes round group, from the wheel group, the metal with the key and basic components of hydraulic pump. Active Wheel Group and passive Wheel Group is composed of movable and fixed disk, and combine cylinder side with Axial sliding and the other side is fixed. Movable and fixed cone structure, they cone Form V type slot with V - type metal belt mesh. Engine output shaft of output power first delivered to continuously variable transmission for driving wheels, and then by V - belt transmission wheel, the final reducer and differential pass driving wheels. Work by driving wheels with gear of movable to move to change the driving wheels, from the work of V - belt mesh and gear cone radius, thus changing the ratio. Movable plate under Axial movement, which was driven by needs through the control system of active round, from the wheel Hydraulic Pump cylinder pressure to achieve. This is designed by the study of metal V - belt type non - polar transmission, found through improvement scheme.
Key words :CVT ;Metal Belt Continuously Variable Transmission;
Continuously Variable Transmission
目錄
摘 要 I
Abstract II
第1章 緒論 1
1.1 汽車無級變速器的類型和特點 2
1.1.1 寬V形膠帶式無級變速器 2
1.1.2 環盤滾輪式無級變速器 2
1.1.3 擺銷鏈?zhǔn)綗o級變速器 2
1.1.4 金屬帶式無級變速器 3
1.1.5 CVT汽車能節油的原理 5
1.1.6 無級變速器使用的注意事項 5
1.1.7 CVT未來的發展趨勢 6
1.2 本章小結 7
第2章 金屬帶式無極變速器基本工作原理 7
2.1 金屬帶式無極變速器基本組成 8
2.2 金屬帶式無極變速器的幾何關系和基本參數 10
2.3 金屬帶式無極變速器傳動參數設計 14
2.3.1 輸入軸參數設計 14
2.3.2 金屬帶輪參數設計 15
2.4 本章小結 16
第3章 金屬帶式無極變速器傳動和承載能力校核 18
3.1 摩擦傳動原理和摩擦因數 18
3.1.1 摩擦傳動原理 18
3.1.2 摩擦因數 19
3.2 金屬帶傳動的力分析 19
3.2.1 金屬帶上的作用力即各力的關系 19
3.3 帶環的強度計算 23
3.3.1 帶環的靜強度計算 23
3.2.2帶環的疲勞強度計算 23
3.4 本章小結 24
第4章 金屬帶式無級變速器的匹配設計 25
4.1 汽車傳動系的結構組成與任務 25
4.2 無級變速器運動參數設計 25
4.2.1 變速比Rb 25
4.2.2 發動機最小燃油消耗特性 25
4.2.3 汽車的、齒輪減速比及無級變速器傳動比 27
4.3 本章小結 28
第5章 雙行星輪行星換向機構設計 29
5.1 換向機構組成及工作原理 29
5.2 前進、倒檔離合器 29
5.3 雙行星輪換擋機構參數設計 30
5.3.1齒輪參數的設計 31
5.4 本章小結 34
結論 35
致 謝 36
附錄1 譯文 38
附錄2 英文參考資料 39
-5-