喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:1064457796 或 1304139763】

編號 無錫太湖學院 畢業設計（論文） 相關資料 題目：基于Pro/E的接水盒注塑模具設計 信機 系 機械工程及自動化專業 學 號： 　　　0923247　　　　 學生姓名： 袁蘊芳 指導教師： 　 曹亞玲 （職稱：講 師 ） （職稱： ） 2012年5月25日 目 錄 一、畢業設計（論文）開題報告 二、畢業設計（論文）外文資料翻譯及原文 三、學生“畢業論文（論文）計劃、進度、檢查及落實表” 四、實習鑒定表 無錫太湖學院 畢業設計（論文） 開題報告 題目： 基于Pro/E的接水盒注塑模具設計 信機 系 機械工程及自動化 專業 學 號： 0923247 學生姓名： 袁蘊芳 指導教師： 曹亞玲 （職稱：講師 ） （職稱： ） 2011年11月14日 課題來源 本課題來源于實際生活。 科學依據（包括課題的科學意義；國內外研究概況、水平和發展趨勢；應用前景等） （1）課題的科學意義 本課題研究的意義在于：隨著科學技術的發展需要，模具已成為現代化不可缺少的工藝裝備，它被稱為工業產品之母，所有工業產品莫不依賴模具才得以規模生產、快速擴張，被歐美等發達國家譽為“磁力工業”。模具設計是機械專業一個最重要的教學環節，是一門實踐性很強的學科，是對我們所學知識的綜合運用，通過對模具設計和制造過程有個基本了解，為以后的工作及學習深造打下了堅實的基礎。接水盒是日常生活中常用的基本品，對它的注塑模具進行設計和分析，有一定的現實意義和經濟價值，是順應當前模具制造行業發展需要的，具有重大意義。 （2）國內外研究狀況、水平和發展趨勢 我國模具工業的產值在國際上排名位居第三，僅次于日本和美國。國內的模具生產廠已超過17000家，從業人員達50萬。近年來，我國的模具工業一直以每年13%左右的增長速度快速發展，我國模具行業在“十五”期間的增長速度達到13%-15%。如今，CAD/CAM/CAE技術的應用水平又上了一個新臺階，以生產家用電器的企業為代表，陸續引進了相當數量的CAD/CAM系統，如美國EDS的UGⅡ、美國Parametric Technology公司的Pro/Engineer等等。這些系統和軟件的引進，雖花費了大量資金，但在我國模具行業中，實現了CAD/CAM的集成，并能支持CAE技術對成型過程，如充模和冷卻等進行計算機模擬，取得了一定的技術經濟效益，促進和推動了我國模具CAD/CAM技術的發展。 研究內容 （1）塑件工藝性分析； （2）注射成型機的選用； （3）注射模的結構組成； （4）型腔分布與分型面的設計； （5）澆注系統設計； （6）導向及脫模機構設計 ； （7）側抽芯機構設計與溫度調節系統的設計。 擬采取的研究方法、技術路線、實驗方案及可行性分析 （1）研究方法 借閱相關書籍雜志，充分利用圖書館及網絡資源。 （2）技術路線 收集資料，確定方案，設計尺寸，三維建模。 （3）實驗方案 首先對塑件進行工藝性分析，選擇接水盒所用材料，并分析其材料性能、成型特性及條件、結構工藝性。根據塑件的生產批量及尺寸精度要求確定型腔數目，確定型腔排布及澆注系統，選用模架。進行校核注射機，設計推出機構及冷卻系統、排氣系統。然后進行主要零部件強、剛度校核。最后按要求繪制模具零件圖、模具裝配圖。 （4）可行性分析 查閱相關設計資料，了解設計過程。熟悉零件各種配合方式和參數的計算，熟練運用AutoCAD軟件和Pro/E軟件，做出機械零件和裝配圖以及三維建模。最后整理資料，完成畢業設計論文。 研究計劃及預期成果 研究計劃： 2012年11月12日-2012年12月2日：收集資料，撰寫開題報告、文獻綜述； 2013年12月3日-2013年3月1日：完成零件三維造型，制定設計方案； 2013年3月4日-2013年3月8日：完成模型結構的設計； 2013年3月11日-2013年3月22日：完成設計的相應計算及相關設計結構的和計算的檢查； 2013年3月25日-2013年4月26日：繪制模型圖、模具圖、模架圖； 2013年4月29日-2013年5月3日：繪制裝配圖； 2013年5月6日-2013年5月10日：編寫設計說明書； 2013年5月13日-2013年5月25日： 遞交畢業設計資料，準備答辯材料，并進行答辯。 預期成果： 設計中各個部件的選擇需要具體分析和理論計算，方案擬定正確；設計計算根據來源可靠，計算數據準確無誤，定位夾緊元件選用正確規范；機械結構圖紙繪制要求視圖完整、符合最新國家標準，圖面整潔、質量高（圖紙繪制要求采用計算機繪圖）；用Pro/E完成模具的三維裝配，用CAD完成零件圖和裝配圖。 特色或創新之處 （1）塑料注塑模能夠一次成型形狀復雜、尺寸精確或帶嵌件的塑料制件； （2）采用組合式凹凸模，節省了成本，便于模具的維修。 已具備的條件和尚需解決的問題 （1）已學過的塑料成型加工工藝、注塑模具的設計等，并具備有Pro/E和Auto CAD制圖能力； （2）對Pro/E的使用有待加強； （3）對整體結構的優化設計也有待加強。 指導教師意見 指導教師簽名： 年 月 日 教研室（學科組、研究所）意見 教研室主任簽名： 年 月 日 系意見 主管領導簽名： 年 月 日 英文原文 The Injection Molding 1. The injection molding Injection molding is principally used for the production of the thermoplastic parts,although some progress has been made in developing a method for injection molding some thermosetting materials.The problem of injection a method plastic into a mold cavity from a reservoir injection molding is quite similar to that of die-casting.The process consists of feeding a plastic compound in powered or granular form from a hopper through metering and melting stages and then injection it into a mold.After a brief cooling period ,the mold is opened and the solidified part ejected.Injection-molding machine operation.The advantage of injection molding are:(i)a high molding speed adapter for mass production is possible;(ii)there is a wide choice of thermoplastic materials providing a variety of useful properties;(iii)it is possible to mold threads,undercuts,side holes,and large thin section. 2. The injection-molding machine Several methods are used to force or injection the melted plastic into the mold.The most commonly used system in the in-line reciprocating screw ,as shown in Figure 2-1.The screw acts as a combination injection and plasticizing unit.As the plastic is fed to rotating screw,it passes through three zones as shown:feed,compression,and metering.After the feed zone,the screw-flight depth is gradually reduced.force the plastic to compress .The work is converted to heat by conduction from the barrel surface.As the chamber in front of the screw becomes filled,it forces the screw back,tripping a limit switch that activates a hydraulic cylinder that forces the screw forward and injects the fluid plastic into the closed mold.An antiflowback vavle presents plastic under pressure from escaping back into the screw flight. The clamping force that a machine is capable of exerting is part of the size designation and is measured in tons.A rule-of thumb can be used to determine the tonnage required for a particular job.It is based on two tons of clamp force per square inch of projected area.If the flow pattern is difficult and the parts are thin,this may have to go to three or four tons. Many reciprocating-screw machines are capable of handing thermosetting plastic materials.Previously these materials were handled by compressiong or transfer molding.Thermosetting materials cure or polymerize in the mold and are ejected hot in the range of 375℃~410℃.Thermosetting parts must be allowed to cool in the mold in order or remove them without distortion.Thus thermosetting cycles can be faster.Of course the mold must be heated rather than chilled,as with thermoplastics. 3. Basic Underfeed Mould The description of the design and the opening sequence follows.The mould consists of three basic parts,namely:the moving half,the floating cavity plate and the feed plate respectively. The moving half consists of The moving mould plate assembly,support block,backing plate,ejector assembly and the pin ejectiong system.Thus the moving half in this design is identical with the moving half of basic moulds. The floating cavity plate,which may be the integer or insert-bolster design,is located on substantial guide pillars(not shown)fitted in the feed plate.These guide pillars must be of sufficient length to support the floating cavity plate over its full movement and still project to perform the function of alignment between the cavity and core when the mould is being closed.Guide bushes are fitted into the moving mould plate and the floating cavity plate respectively. The maximum movement of the floating cavity plate is controlled by stop or similar device.The moving mould plate is suitably bored to provide sufficient a clearance for the stop bolt assembly.The stop bolts must be long enough to provide sufficient space between the feed plate and the floating cavity plate for easy removal of the feed system.The minimum space provide for should be 65mm just sufficient for an operator to remove the feed system by hand if necessary. The desire operating sequence is for the first daylight to occur between th e floating cavity plate.This ensures the sprue is pulled from the sprue bush immediately the mould is opened.To achieve this sequence,springs may be incorporated between the feed plate and the floating cavity plate.The springs should be enough to give an initial impetus to the floating cavity plate to ensure it moves away with themoving half.It is normal practice to mount the springs on the guide pillars and accommodate them in suitable pocket in the cavity plate. The major part of the feed system(runner and sprue)is accmmodated in the feed plate to facilitate automatic operation,the runner should be of a trapezoidal form so that once it is pulled from the feed plate is can easily be extracted.Note that if a round runner is used,half the runner is formed in the floating cavity plate,where it would remain,and be prevented from falling or being wiped clear when the mould is opened. Now that we have considered the mould assembly in the some detail,we look at the cycle of operation for this type of mould. The impressions are filled via the feed system and after a suitable dwell period,the machine platens commence to open.A force is immediately exerted by the compression springs,which cause the floating cavity plate to move away with the moving half as previously discussed.The sprue is pulled from the sprue bush by the sprue puller.After the floating cavity plate has moved a predetermined distance,it is arrested by the stop bolts.The moving half continued to move back and the moldings,having shrunk on to the cores,are withdrawn from the cavitities.The pin gate breaks at its junction with the runner. The sprue puller,being attached to the moving half,is pulled through the floating cavity plate and thereby release the feed system which then free to fall between the floating cavity plate and the moldings are ejected.When the mould is closed,the respective plates are returned to their molding position and the cycle is repeated. 4. Feed System It is necessary to provide a flow-way in the injection mould to connect the nozzle(of the injection machine) to each impression. This flow-way is termed the feed system.Normally the feed system comprises a sprue,runner and gate.These terms apply equally to the flow-way itself,and to the molded material which is remove from the flow-way itself in the process of extracted molding. A typical feed system for a four-impression,two plate-type mould .It is seen that the material passes through the sprue,main runner,branch runner and gate before entering the impression. As the temperature of molten plastic is lowered which going through the sprue and runner,the viscosity will rise;however,the viscosity is lowered by shear generated when going through the gate to fill the cavity .Ti is desirable to keep the distance that the material has to travel down to a minimum to reduce pressure and heat losses.It is for the reason that careful consideration must be given to the impression layout gate’s design. 4.1 Sprue A sprue is a channel through which to transfer molten plastic injected from the nozzle of the injector into the mold.It is a part of sprue bush,which is a separate part from the mold. 4.2 Runner Arunner is a channel that guides molten plastic into the cavity of a mold. 4.3 Gate A gate is an entrance through which molten plastic enters the cavity.The gate has the following function:restricts the flow and the direction of molten plastic;simplifies cutting of a runner and moldings to simplify finishing of parts;quickly cools and solidifies to avoid backflow after molten plastic has filled up in the cavity. 4.4 Cold slug well The purpose of the cold slug well,shown opposite the sprue,is theoretically to receive the material that has chilled at the front of nozzle during the cooling and ejection phase.Perhaps of greater importance is the fact that it provides position means whereby the sprue bush for ejection purposes. The sprue,the runner and the gate will be discarded after a part is complete.However,the runner and the gate are important items that affect the quality or the cost of parts. 5. Ejection A molding is formed in mould by injecting a plastic melt , under pressure , into an impression via a feed system . It must therefore be removed manually . Furthermore , all thermoplastic materials contract as they solidify , which means that the molding will shrink on to the core which forms it . This shrinkage makes the molding difficult to remove. Facilities are provided on the injection machine for automatic actuation of an ejector system , and this is situated behind the moving platen . Because of this . The mould’s ejector system will be most effectively operated if placed in the morning half of the mould ,i.e. The half attached to the moving platen . We have stated previously that we need to eject the,molding,from the score and it therefore follows that the core ,too , will most satisfactorily be located in the moving half . The ejector system in a mould will be discussed under three headings , namely :(i) the ejector gird;(ii) the ejector plate assembly;and (iii) the method of ejection. 5.1 Ejector gird The ejector gird is that part of the mould which supports the mould plate and provides a space into which the ejector plate assembly can be fitted and operated . The gird normally consists of a back plate on to which is mounted a number of conveniently shaped “support blocks ”. The ejector plate assembly is that part of the mould to which the ejector element is attached .The assembly consists of an ejector plate , a retaining plate and an ejector rod .One end of this letter member is threaded and it is screwed into the ejector plate . In this particular design the ejector rod function not only as an actuaing member but also as a method guiding the assembly .Note that the parallel portion of the ejector rod passes through an ejector rod bush fitted in the back plate of the mould. 5.2 Ejection techniques When a molding cools , it contacts by an amount depending on the material being processed . For a molding which has no internal form , for example , a solid rectangular block , the molding will shrink away from the cavity walls , thereby permitting a simple ejection technique to be adopted .However , when the molding has internal form , the molding , as it cools ,will shrink onto the core and some positive type of ejection and some positive type of ejection is necessary. The designer has several ejection techniques form which to choose , but in general , the choice will be restricted depending upon the shape of the molding . The basic ejection techniques are as follows:(i)pin ejection (ii)sleeve ejection (iii)stripper plate ejection and (IV)air ejection. 中文譯文 注塑模 1. 注塑模 盡管成型某些熱固性材料的方法取得了一定的進步,但注塑模主要用來生產熱塑性塑件。熱固性塑料熔體在很短的時間內就固化和硬化,在從料斗箱模具型腔注入熱固性塑料熔體的過程中,也會出現這種情況,這個問題一直非常難解決,注塑成型原理和鑄造十分相似。注塑成型的工藝包括:首先把料斗中的粉狀、粒狀的塑料混合物依次輸送發哦計量區和融化區,然后再注射到模具的型腔中,經過一段時間的冷卻后,開模,退出成型塑件,注塑件分為手動,半自動及全自動操作。注塑模具有以下優點：(1)較高的成型速度使大批量生產成為可能；(2)為成型具有不同使用性能的熱塑性材料提供了較寬的選擇；(3)可以成型帶有螺紋的塑件、側向凹陷的塑件、帶有側孔的塑件以及較大的薄壁件。 2. 注塑機 熔融塑料進入模具中通常有幾種方式。在大型注塑機上常帶采用螺桿式的注入方式。螺桿同時具有注射和塑化的功能。樹脂原料進入旋轉的螺桿時,要經過圖示的三個區域：喂入?yún)^(qū),壓實區和計量區。經過喂入?yún)^(qū)后，為壓實樹脂原料,螺桿螺旋部分的深度逐漸降低,同時傳遞樹脂原料間因剪切作用而產生的熱量,使原料呈半流動狀態。在計量區,螺缸表面的加熱裝置對熔體進一步加熱。當熔體充滿螺桿前部區域時,螺桿在熔體壓力的作用下后退,觸動限位開關使液壓缸工作,在液壓力的作用下推動螺桿向前運動,將熔融塑料注射到閉合的模具型腔中。防倒流閥能夠組阻止受壓熔體倒流進螺桿的螺旋區。 注塑機的鎖模系統做提供的鎖模力由尺寸決定,鎖模力以噸為單位。通?？拷?jīng)驗來決定塑件所需要的鎖模力總噸數,一般在塑件投影面積上每平方英寸需要作用兩噸鎖模力。如果熔體流動困難或塑件較薄,鎖模力應提高到三到四噸。 許多往復螺桿式注塑機能生產熱固性塑料。以前,熱固性塑料由擠出模具或傳遞模具生產。熱固性塑料熔體在模具內固化或發生聚合反應,并在溫度357℃~410℃范圍內推出。熱塑性塑料熔體必須在模具內冷卻成型,以保證推出時不發生變形,這種熱固性循環速度很快。當然,生產熱塑性塑料時,模具必須被加熱,而不是冷卻。 3. 模具基本結構 這種簡單的模具結構,模具設計和開模順序?qū)⒃谝韵碌钠姓撌?。模具由三個基本部分組成,分別是動模部分,浮動型腔板和定模板。 動模部分包括模板組件、支撐塊、支撐板,推出機構和頂桿推出系統。這樣設計的動模部分與最基本的模具結構中的動模部分相同。 浮動型腔板通過導柱固定在定模板上,設計形式可以是整體式,也可以是鑲拼式。導柱必須有足夠的長度,支撐浮動型腔板完成開合動作,并在模具合模時完成對型腔和型芯的找正作用。導套分別安裝在動模板和浮動型腔板上。 浮動型腔板的最大運動距離由限位釘或類似裝置控制。在動模板的適當位置鉆孔,以便安裝限位釘。限位釘必須有足夠的長度為定模板和浮動型腔板之間提供足夠的空間,從而使?jié)沧⑾到y(tǒng)的凝料順利脫落。如果必須使用手動方式取出凝料,開模時取出凝料所需的最小距離應為65mm。 模具的開模順序是:浮動型腔板和定模板先分開。確保模具打開時澆注系統凝料立即從澆口套脫出。為實現這樣的順序,定模板和浮動型腔板之間裝有彈簧。彈簧的彈力必須足夠大,確保在初始推力的作用下浮動型腔板跟隨動模部分一起運動。彈簧套在導柱上,一同裝在浮動型腔板上相應的彈簧座處,這種形式在彈簧裝配中十分常見。 澆注系統的主要部分開設在定模板上,為便于自動操作,分流道應采用梯形截面,以便于脫出澆注系統凝料。注意,如果采用圓形分流道,分流道的一半開設在浮動型腔板上,開模時,分流道可能留在浮動型腔板,將阻礙凝料的脫落或去除。 我們已經詳細討論模具裝配,再看這類模具的生產循環過程。 熔體經過澆注系統充滿型腔后，經過適當?shù)谋哼^程,注塑機帶動模具開模。壓縮彈簧的彈力立即釋放出來,推動浮動型腔板和動模部分一起移動，如同前面論述的一樣。主流道凝料被拉料桿從澆口套中拉出。浮動型腔板移動預定距離后,被限位釘限位。動模部分繼續后移,塑件由于收縮作用包緊在型芯上從型腔中脫出。點澆口在結合處拉斷,與分流道脫離。 安裝在動模部分的拉料桿脫離浮動型腔板,澆注系統凝料由此脫下,然后在浮動型腔板和定模板之間自由落下。動模部分繼續后退,直到推出機構開始運動,推出塑件。和模時,模具的各模板回到成型位置,重復下一個注塑循環。 4. 澆注系統 在注塑模中,連接噴嘴和各個型腔的流動通道是十分必要的,這種進料通道稱為澆注系統。通常,澆注系統由主流道、分流道和澆口組成。這些術語應用在相應的進料通道本身,以及取出塑料時從進料通道中一同取出的澆注系統凝料。 典型的兩版式四腔澆注系統?？梢钥闯鲈贤ㄟ^主流道、第一分流道、第二分流道和澆口注入道型腔中。熔融塑料通過主流道和分流道時溫度降低而使熔體粘度降低。澆注系統要保持適當?shù)拈L度,使熔體的壓力減少和熱量損失降到最低。因此,設計時必須充分考慮型腔布局和澆口形式。 4.1 主流道 主流道是將熔融塑料從注塑機噴嘴傳遞到模具型腔的通道。主流道是澆口套的一部分,澆口套是獨立于模具的單獨零件。 4.2 分流道 分流道是引導熔體塑料進入模具型腔的通道。 4.3 澆口 澆口是熔融塑料進入型腔的入口。澆口有以下作用:約束熔融塑料流動,應道熔融塑料的流動方向；使分流道和塑件末端易于分離；快速冷卻固化,防止熔融塑料充滿型腔后倒流。 4.4 冷料井 冷料井正對著主流道。理論上,冷料井的作用是用來儲存在（塑件）冷卻和推出過程中注塑機噴嘴處形成的熔體前鋒冷料。也許冷料井更重要的作用是幫助澆道凝料推出澆口套。 塑料成型后,主流道、分流道和澆口部分凝料將被廢棄。但是,分流道和澆口對塑件質量和成本有重要影響。 5. 推出機構 塑料熔體在壓力作用下經過澆注系統進入模具形成塑件，因此（塑件成型后）必須手動取出。此外，所有熱塑性熔體凝固時都會收縮，這意味著塑料將包緊在型芯上。收縮作用使塑料脫膜（存在）困難。 注塑機為推出系統提高了自動推出力，其推出動力裝置安裝在注塑機移動板的后面。因此，模具的推出系統安裝在動模部分將獲得最大效率，例如，這部分（可以）安裝在移動板上。我們在前面論述了（開模時）需要從型芯上推下塑件，因此，塑料必須跟隨型芯（一同移動），推出系統裝在動模部分最為合適。 模具的推出系統將在以下三個標題中論述，即：（1）推出支架；（2）推板裝配機構；（3）推出方式。 5.1 推出支架 推出支架是模具的一部分，用來支撐模板，為推板的裝配和運動提供空間。推出支架通常由定模座板和幾塊支撐塊組成，支撐塊安裝在動模座板上，且便于加工成型。 推板裝配機構也是模具的一部分，用來安裝推出零件。推板裝配機構安裝在推板支撐架內，直接裝在模板后面。裝配機構由推板、推板固定板和注塑機頂出桿組成。注塑機頂出桿一端帶有螺紋，通過螺紋緊固在推板上。在這種結構中，頂出桿的作用不僅是推出零件，而且為推板裝配機構起導向作用。注意，頂出桿直接相等的部分通過頂出桿套筒，套筒安裝在模具座板上。 5.2 推出方式 塑件冷卻后,其收縮狀態決定于塑料熔體的成型過程。對于內部不帶有其他形狀的塑件,例如,實芯矩形件,塑件的收縮作用使其脫離型腔壁,因此,可以采用簡單的脫模方式(推出塑件)。然而,若塑件具有內部形狀,冷卻收縮時塑件將包緊在型芯上,因此,有必要采用一些適當?shù)姆椒ㄍ瞥鏊芗? 設計推出機構時有幾種方式可供選擇,但是,總的來說,選擇哪種推出方式取決于塑件的形狀。基本的推出方式有以下幾種:(1)推桿脫模；(2)推管脫模；(3)推件板脫模；(4)氣動脫模。