喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
哈爾濱工業大學華德應用技術學院畢業設計（論文）
摘要
驅動橋作為汽車四大總成之一，它的性能的好壞直接影響整車性能，而對于載重汽車顯得尤為重要。當采用大功率發動機輸出大的轉矩以滿足目前載重汽車的快速、重載的高效率、高效益的需要時，必須要搭配一個高效、可靠的驅動橋。所以采用傳動效率高的單級減速驅動橋已成為未來重載汽車的發展方向。
本文參照傳統驅動橋的設計方法進行了載重汽車驅動橋的設計。本文首先確定主要部件的結構型式和主要設計參數；然后參考類似驅動橋的結構，確定出總體設計方案；最后對主，從動錐齒輪，差速器圓錐行星齒輪，半軸齒輪，全浮式半軸和整體式橋殼的強度進行校核以及對支承軸承進行了壽命校核。本文采用傳統的雙曲面錐齒輪作為載重汽車的主減速器。
關鍵字：載重汽車；橋間差速器；貫通橋；全浮式半軸
ABSTRACT
As a vehicle drive axle assembly of one of the four, and its performance will have a direct impact on vehicle performance, and it is particularly important for trucks. When using high-power engine torque output of large trucks to meet the current fast, heavy-duty high-efficiency, cost-effective and necessary, must be with an efficient, reliable bridge driver. Therefore, efficient use of transmission of a single-stage driver slow down the bridge has become a heavy-duty motor vehicles in the future development direction.
In this paper, in the light of the traditional design of the drive axle of the truck driver for the design of the bridge. This article first identified the major components of the structure and main design parameters; then a similar reference to the drive axle of the structure to determine the overall design of the program; on the final owner, Gear Driven cone, cone differential planetary gear, axle gear, the all-floating Half-bridge and the overall strength of the shell to carry out verification as well as support for the life of bearing checking. This article is not a traditional double-bevel gear surface as the main reducer truck instead of using the spiral bevel gear, as a hope that this will continue to study this issue.
Keyword: truck driver bridge double-stage bridge slowdown spiral bevel gear
II