臥式車床數控化改造設計-縱向進給系統設計,臥式車床數控化改造設計-縱向進給系統設計,臥式,車床,數控,改造,設計,縱向,進給,系統 南京理工大學泰州科技學院 畢業設計說明書(論文) 作 者: 閆紅旗 學 號： 0501510146 系　部: 機械工程系 專 業: 機械工程及自動化 題 目: 臥式車床數控化改造設計 ——縱向進給系統的設計 張少文 助教 張衛 高級工程師 指導者： 評閱者： 2009 年 6 月 畢業設計說明書（論文）中文摘要 數控技術的水平高低和機床的數控化率是衡量一個國家工業發展水平的重要標志。目前我國機床的數控化率還不到5%,無論從數控技術水平和機床的數控化率都大大落后于西方發達國家。加快發展我國的機床改造業，具有重要的現實意義和使用價值。 本文主要是采用微機數控技術對最大加工直徑為400mm的普通臥式車床進行改造。首先對普通臥式車床的改造任務和功能需求進行了認真分析，其次設計出總體改造方案，包括主傳動系統、進給系統、回轉刀架及微機控制系統的方案設計，最后經過對切削力的計算、滾珠絲杠副、齒輪副及步進電機的選型，給出了縱向進給系統的詳細設計。 關鍵詞 數控 改造 車床 縱向進給 畢業設計說明書（論文）外文摘要 Title Design of Horizontal Machine based on Numerical Control Technology ——Design of Longitudinal Feeding System Abstract Level of numerical control technology and CNC machine tool is a measure of the rate of a national industrial development an important indicator of the level. CNC machine tools in China is less than the rate of 5%, CNC technology in terms of the level and rate of NC machine tools are lagging far behind developed countries in the West. Speed up the transformation of the development of China's machine tool industry, has important practical significance and value. This paper mainly using computer numerical control technology to alter the ordinary horizontal lathe whose maximum machining diameter is 400mm. first of all, horizontal lathe for ordinary tasks and functions of the transformation of a careful analysis of needs,Second, the design of the overall reform program, including the main drive system, feed system, rotary tool holder and the program of microcomputer control system design, after the final calculation of cutting force, ball screw, gear and stepper motor selection, vertical feed is given for the detailed design. Keywords Numerical control Transformation lathe Vertical feeding system