組合機床畢業設計外文翻譯
《組合機床畢業設計外文翻譯》由會員分享,可在線閱讀,更多相關《組合機床畢業設計外文翻譯(4頁珍藏版)》請在裝配圖網上搜索。
1、The Aggregate Machine-tool The Aggregate Machine-tool is based on the workpiece needs, based on a large number of common components, combined with a semi-automatic or automatic machine with a small number of dedicated special components and process according to the workpiece shape and design of
2、special parts and fixtures, composed. Combination machine is generally a combination of the base, slide, fixture, power boxes, multi-axle, tools, etc. From. Combination machine has the following advantages: (1) is mainly used for prism parts and other miscellaneous pieces of perforated surface p
3、rocessing. (2) high productivity. Because the process of concentration, can be multi-faceted, multi-site, multi-axis, multi-tool simultaneous machining. (3) precision and stability. Because the process is fixed, the choice of a mature generic parts, precision fixtures and automatic working cycle to
4、ensure consistent processing accuracy. (4) the development cycle is short, easy to design, manufacture and maintenance, and low cost. Because GM, serialization, high degree of standardization, common parts can be pre-manufactured or mass organizations outsourcing. (5) a high degree of automation, lo
5、w labor intensity. (6) flexible configuration. Because the structure is a cross-piece, combination. In accordance with the workpiece or process requirements, with plenty of common parts and a few special components consisting of various types of flexible combination of machine tools and automatic li
6、nes; tools to facilitate modification: the product or process changes, the general also common components can be reused. Combination of box-type drilling generally used for processing or special shape parts. During machining, the workpiece is generally not rotate, the rotational motion of the to
7、ol relative to the workpiece and tool feed movement to achieve drilling, reaming, countersinking, reaming, boring and other processing. Some combination of turning head clamp the workpiece using the machine to make the rotation, the tool for the feed motion, but also on some of the rotating parts (s
8、uch as the flywheel, the automobile axle shaft, etc.) of cylindrical and face processing. Generally use a combination of multi-axis machine tools, multi-tool, multi-process, multi-faceted or multi-station machining methods simultaneously, productivity increased many times more than generic tools
9、. Since the common components have been standardized and serialized, so can be flexibly configured according to need, you can shorten the design and manufacturing cycle. Multi-axle combination is the core components of general machine tools. It is the choice of generic parts, is designed according t
10、o special requirements, in combination machine design process, is one component of a larger workload. It is based on the number and location of the machining process diagram and schematic design combination machine workpiece determined by the hole, cutting the amount of power transmission components
11、 and the design of each spindle spindle type movement. Multi-axle power from a common power box, together with the power box installed on the feed slide, to be completed by drilling, reaming and other machining processes. The parts to be processed according to the size of multi-axle box combination
12、machine tool design, based on an original drawing multi-axle diagram, determine the range of design data, the above design, implementation, completion of a two-sided 24-hole machining, achieve better the design requirements. In order to adapt to the development of CNC machine tools in combinatio
13、n , appeared composed of CNC machine tools CNC machining modules. Modular is the result of a combination of machine tool numerical control machine tool combination brings, but also the basis of a combination of CNC machine tools , CNC machining enriched the universal modular combination of component
14、s of the machine, it will cause a fundamental piece for machine tool type changes . Over the past decade , the combination of machine tools and automatic line has made great strides in efficiency, productivity , flexibility and the use of concurrent engineering to develop a more rational, more savin
15、gs programs. With the development of digital technology, electronic technology , the combination of machine mechanical structure and control system has undergone great changes. With a combination of the following development tools : 1 NC . Combination of CNC machine tools emerge , not only changed i
16、n the past by the relay circuit consisting of a combination of machine tool control systems , but also make head or even a combination of the mechanical structure of the machine components of general criteria huge change occurred . 2 modular . NC modular greatly enriched the common combination of co
17、mponents of the machine, it will cause a fundamental change occurred for machine tool parts , according to the principles of modular design , based on the functional analysis division of the combination of multi- axle box for each machine level modules. 3 speed. As the high-speed processing can redu
18、ce the surface roughness and cutting force components , reducing the cutting temperature , improve productivity, so the speed of the machine is just beginning research , especially the main movement of CNC machine tools and feed velocity has reached a very high speed . Conform to the trend of high-s
19、peed machine tools , machine tool s speed will be higher. 4 , precision . Because the CNC machine to achieve , so more and more high machining accuracy . 5, full protection technology . Now the machine is fully enclosed features a large , almost all mechanical housings are fully closed . Fully enclo
20、sed protection, not only to make the machine more attractive appearance and its production line , but also improves the safety, reliability and ease of maintenance . Combination machine with both the advantages of low cost and high efficiency in large volume production has been widely used, and can
21、consist of automated production lines. . 組合機床 組合機床是根據工件加工需要,以大量通用部件為基礎,配之以少量的專用部件和按工件形狀和加工工藝設計的專用部件和夾具,組成的半自動或自動的專用機床。組合機床一般由底座、滑臺、夾具、動力箱、多軸箱、刀具等等組合而成。 組合機床具有如下的優點:(1)主要用于棱體零件和雜件等的孔面加工。(2)生產率高。因為工序集中,可以多面、多工位、多軸、多刀同時進行加工。(3)加工精度穩定。因為工序固定,可選用成熟的通用部件、精密夾具和自動工作循環來確保加工精度的一致。(4)研
22、制周期短,便于設計、制造和使用維護,成本較低。因為通用化、系列化、標準化程度高,通用件可組織批量生產進行預先制造或外購。(5)自動化程度高,勞動強度較低。(6)配置靈活。因結構是橫塊化、組合化??砂凑展ぜ蚬ば蛞?,用大量通用部件和少量專用部件靈活組成各種類型的組合機床和自動線;機床便于改裝:產品或工藝發生變化時,通用部件一般還可以重復使用。 組合鉆床一般用于加工箱體類或特殊形狀等零件。加工時,工件一般不旋轉,由刀具的旋轉運動和刀具與工件的相對進給運動,來實現鉆孔、擴孔、锪孔、鉸孔、鏜孔等加工。有的組合機床采用車削頭夾持工件使之旋轉,由刀具作進給運動,也可對某些回轉體類零件(如飛輪、汽車后橋
23、半軸等)的外圓和端面加工。 組合機床一般采用多軸、多刀、多工序、多面或多工位同時加工的方式,生產效率比通用機床提高很多倍。由于通用部件已標準化和系列化,所以可根據需要靈活配置,就能縮短設計和制造周期。多軸箱是組合機床的核心通用部件。它是選用通用零件,是按專用要求進行設計的,在對組合機床設計的過程中,是工作量較大的部件之一。它根據組合機床設計的工序圖和加工示意圖所確定的工件加工孔的數量和位置,切削用量和主軸類型設計的傳遞各主軸運動的動力部件。多軸箱動力來自通用的動力箱,與動力箱一起安裝于進給滑臺,可完成鉆孔,絞孔等加工工序。根據需加工的零件尺寸進行組合機床通用多軸箱的設計,繪制多軸箱原始依據圖
24、,確定一系列的設計數據,通過以上設計,實現了雙面24孔的一次加工完成,較好地達到了設計要求。 為了適應數控組合機床的發展,就出現了組成數控機床的數控加工模塊。組合機床模塊化是組合機床數控化所帶來的結果,也是組合機床數控化的基礎,數控加工模塊化豐富了組合機床的通用部件,它一定會引起組合機床通用件發生根本型變化。近十年來,組合機床及其自動線在高效、高生產率, 柔性化以及采用并行工程制訂更合理、更節省的方案方面取得了很大的進展。近年來隨著數控技術、電子技術等的發展,組合機床的機械結構和控制系統也發生了很大的變化。組合機床有了以下的發展:1. 數控化。數控組合機床的出現,不僅改變了過去由繼電器電路組
25、成的組合機床的控制系統,而目也使組合機床機械結構甚至通用部件標準發生了巨大的變化。2. 模塊化。數控加工模塊化極大地豐富了組合機床的通用部件,它一定會引起組合機床通用件發生根本性的變化,根據模塊化設計的原理,在功能分析的基礎上劃分了組合機床多軸箱的各級模塊。3. 高速化。由于高速加工可降低零件表面粗糙度及切削力,減小切削溫度,提高生產率,所以機床的高速化研究才剛剛開始,特別是數控機床的主運動和進給運動速度已達到了非常高的速度。順應機床高速化的潮流,組合機床的速度也會越來越高。4、精密化。因為機床實現了數控化,所以機床的加工精度越來越高。5、全防護化。全封閉式是現在機床的一個大的特點,幾乎所有的機械均采用全封閉的外罩。全封閉防護,不但使機床及其生產線外形更加美觀,而且也提高了安全性、可靠性和維修的便利性。組合機床同時兼有低成本和高效率的優點,在大批大量生產中得到了廣泛的應用,并可以組成自動生產線。
- 溫馨提示:
1: 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
2: 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
3.本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
5. 裝配圖網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。
最新文檔
- 2023年六年級數學下冊6整理和復習2圖形與幾何第7課時圖形的位置練習課件新人教版
- 2023年六年級數學下冊6整理和復習2圖形與幾何第1課時圖形的認識與測量1平面圖形的認識練習課件新人教版
- 2023年六年級數學下冊6整理和復習1數與代數第10課時比和比例2作業課件新人教版
- 2023年六年級數學下冊4比例1比例的意義和基本性質第3課時解比例練習課件新人教版
- 2023年六年級數學下冊3圓柱與圓錐1圓柱第7課時圓柱的體積3作業課件新人教版
- 2023年六年級數學下冊3圓柱與圓錐1圓柱第1節圓柱的認識作業課件新人教版
- 2023年六年級數學下冊2百分數(二)第1節折扣和成數作業課件新人教版
- 2023年六年級數學下冊1負數第1課時負數的初步認識作業課件新人教版
- 2023年六年級數學上冊期末復習考前模擬期末模擬訓練二作業課件蘇教版
- 2023年六年級數學上冊期末豐收園作業課件蘇教版
- 2023年六年級數學上冊易錯清單十二課件新人教版
- 標準工時講義
- 2021年一年級語文上冊第六單元知識要點習題課件新人教版
- 2022春一年級語文下冊課文5識字測評習題課件新人教版
- 2023年六年級數學下冊6整理和復習4數學思考第1課時數學思考1練習課件新人教版