東風EQ1092F型載貨汽車手動三軸式分動器設計含開題及9張CAD圖,東風,EQ1092F,載貨,汽車,手動,三軸式分動器,設計,開題,CAD 附 錄 附錄A 英文科技文獻 Suvs in bad roads or often, especially under the situation and military vehicles driving conditions, this requires more severe increase the number of vehicles driving wheel, therefore, by more than off-road vehicles driving. For example, if a single shaft drive vehicle driving wheel into two ditch (this happens in bad road often meet), then the vehicle can through the wheel and the friction force and move on. If the vehicle is more, even if the drive shaft driving wheel part, the driver to drive wheels still can continue to work, vehicle. In many shaft drive vehicle, the output power to be allocated to each drive shaft with thansfer. Thansfer FenDongXiang called, the basic structure and the gearbox similar, is a gear transmission system. Thansfer outfit in bridge drive the car transmission and distribution, used to drive, power transmission and vice. Standing two files, cheap and strength. In order not to make driving axle overload, have standing chain drive engagement before after only, can hang strength and overcome the car in bad roads and road of large area and the lowest stable driving resistance speed. For direct files or high-grade to slow. Off-road vehicle in good roads, to reduce the power consumption of the transmission parts and tire wear, general to cut through front axle. On a cross-country driving, front axle and adopted according to the jointing, increase speed and driving wheel drive. Thansfer according to the structure can be divided between the differential with axle shaft, don't take between thansfer described.application cases of overrunning clutch and equipped with thansfer thansfer. (1) with the differential between shaft and the output shaft thansfer in different speed, torque distribution by differential transmission. Accordingly, can according to the shaft torque distribution proportion to Hollywood to drive the distribution. With the car, not only the thansfer hanged when can make full strength gear wheel drive, to overcome bad roads and road surface area, and the larger hanging thansfer high resistance at also can make whole wheel drive, to make full use of adhesive weight and adhesion, improve the car in good road traction. (2) with the differential between shaft and the output shaft thansfer has the same speed and torque distribution and the driving wheels of resistance and transmission mechanism of stiffness. This structure in hung low at the same time thansfer will connect front axle axles, And when the high-end axles front axle hangs with transmission is certain to become a follower bridge, to prevent and reduce automobile in power cycle good road of power consumption and tyre wear etc. (3) containing overrunning clutch, using the sense of thansfer speed skating when seeking after turn automatically when connected to the former axles, reverse when working with another overrunning clutch. Some thansfer fat&oil gear and transmission chain. Thansfer adopts splash lubrication more. Thansfer has developed into the fifth generation: the first generation of thansfer basically is fission structure, straight gear, gear shaft operation, iron shell, The second generation thansfer though fission, but has changed from the structure of inclined gear transmission, single shift shaft operation and aluminum alloy shells to a certain extent, improve the transmission efficiency, easy the shift, reduces the noise and consumption, The third generation thansfer increased synchronizer, make the multiaxial vehicle in procession shift function, The first generation of major changes in thansfer adopts conjoined structure and planetary gear, chain and optimized shift and greatly improve the transmission efficiency and performance, The fifth generation thansfer adopts die-casting aluminum alloy material, shell, the tooth type chain output by low gears planetary gear inclined, make its lightweight transmission efficiency and reliable, simple and compact structure, control noise is lower. Thansfer structure features of output shaft transmission system is using the low noise of multi chain transmission. The advantages of gear transmission chain relatively smooth transmission, the noise is small, the requirement of center distance, low bearing load smaller and prevent resonance. Thansfer function of torque capacity is big, light weight, high efficiency, the noise is small, lightweight, shift more greatly improved the accuracy of vehicle driving torque distribution, thus improving the vehicle performance. Thanks to modern vehicle engine output torque is larger, even at high speed can still large torque output, coupled with a wider range of transmission ratio change, can well meet the requirements of the vehicle, therefore, thansfer will be further wide application and development. 附錄B 文獻翻譯 越野車經常在不良道路或無路情況下行駛，尤其是軍用車輛的行駛條件更為惡劣，這就要求增加車輛驅動輪的數目，因此，越野車多采用多軸驅動。例如，如果一輛單軸驅動車輛的兩驅動輪陷入溝中(這種情況在不良路面上經常會遇到)，那么車輛就無法通過車輪與地面的摩擦產生驅動力而繼續前進。如果車輛是多軸驅動，即使部分驅動車輪無法正常驅動，其余驅動車輪仍可正常工作，車輛能夠繼續行駛。在多軸驅動車輛上，為了將輸出的動力分配給各驅動軸都設有分動器。 分動器又稱為分動箱，其基本結構和變速箱相似，是一個齒輪傳動系統。分動器裝于多橋驅動汽車的變速器之后，用于傳遞和分配動力至各驅動橋，兼作副變速器之用。常設兩個檔，低檔又稱加力檔。為了不使后橋超載常設有連鎖機構，使只有接合前驅動橋以后才能掛上加力檔，并用于克服汽車在壞路面上和無路地區的較大行駛阻力及獲得最低穩定車速。高檔為直接檔或者亦為減速檔。越野汽車在良好道路行駛時，為減小功率消耗及傳動系機件和輪胎磨損，一般要切斷通前橋動力。在越野行駛時，根據需要接合前橋并采用低速檔，增加驅動輪數和驅動力。 分動器按結構可以分為帶軸間差速器的分動器、不帶軸間差速器的分動器和裝有超越離合器的分動器。 （1）帶有軸間差速器的分動器，各輸出軸可以以不同的轉速旋轉，而轉矩分配則由差速器傳動比決定。據此，可將轉矩按軸荷分配等比例地分配到各驅動橋。裝用這種分動器的汽車，不僅掛加力檔時可使全輪驅動，以克服壞路面和無路地區地面的較大阻力，而且掛分動器高當時也可使全輪驅動，以充分利用附著重量及附著力，提高汽車在好路面上的牽引性能。 （2）不帶軸間差速器的分動器，各輸出軸具有相同的轉速，而轉矩分配則與該驅動輪的阻力及其傳動機構的剛度有關。這種結構的分動器在掛低檔時同時將接通前橋驅動橋；而掛高檔時前橋驅動橋則一定與傳動系分離，使變?yōu)閺膭訕蛞员苊獍l(fā)生功率循環并降低汽車在好路面上行駛時的動力消耗及輪胎等的磨損。 （3）裝有超越離合器的分動器，利用前后輪的轉速差使當后輪滑轉時自動接上前驅動橋，倒檔時則用另一超越離合器工作。 有的分動器兼用齒輪及傳動鏈。分動器多采用飛濺潤滑。 分動器已經發展到第五代：第一代的分動器基本上為分體結構，直齒輪傳動、雙換檔軸操作、鑄鐵殼體；第二代分動器雖然也是分體結構，但已改為全斜齒齒輪傳動、單換檔軸操作和鋁合金殼體，一定程度上提高了傳動效率、簡便了換檔、降低了噪音與油耗；第三代分動器增加了同步器，使多軸驅動車輛具備在行進中換檔的功能；第四代分動器的重大變化在于采用了聯體結構以及行星齒輪加鏈傳動，從而優化了換檔及大大提高了傳動效率和性能；第五代分動器殼體采用壓鑄鋁合金材料、齒型鏈傳動輸出，其低擋位采用行星斜齒輪機構，使其輕便可靠、傳動效率高、操縱簡單、結構緊湊、噪音更低。分動器的結構特點是前輸出軸傳動系統皆采用低噪聲的多排鏈條傳動。鏈傳動相對齒輪傳動的優點有傳動平穩、嗓聲小、中心距誤差要求低、軸承負荷較小及防止共振。分動器功能上的特點是轉矩容量大、重量輕、傳動效率高、噪音小、換擋輕便準確，大大改善了多驅動車輛的轉矩分配，進而提高了整車性能。 由于現代車輛發動機輸出的轉矩比較大，即使在高速運轉時仍可輸出較大的轉矩，加上變速箱的傳動比變化范圍較大，能夠很好地滿足車輛的使用要求，因此，分動器將會得到進一步廣泛的發展和應用。