喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有,,請放心下載,,文件全都包含在內,,【有疑問咨詢QQ:414951605 或 1304139763】
系主任
批準日期
茂 名 學 院
畢 業 設 計(論 文)任 務 書
機電工程 系 機械設計制造及其自動化 專業 機電04-2 班 學生 廖志華
一、畢業設計(論文)課題 法蘭盤斜孔和徑向孔加工回轉分度鉆床夾具設計
二、畢業設計(論文)工作自 2008年 3 月 17日起至 2008 年 6 月 15 日止
三、畢業設計(論文)進行地點 茂名學院機電工程學院
四、畢業設計(論文)的內容要求
(一)、已知條件
(1)、被加工的零件的零件圖
(2)、成批生產
(二)、主要內容及要求
(1)、按要求寫出開題報告
(2)、結合課題到工廠進行畢業實習
(3)、收集國內外有關情報資料,查閱文獻資料15篇以上
(4)、翻譯不少于5000字的英語科技文獻
(5)、研究形成總體方案
(6)、設計繪制出夾具的總裝工作圖
(7)、繪制出主要零件圖
(8)、按學校規定格式編寫出不少于20000字的設計計算說明書(含文獻綜述)
(9)、準備和參加畢業答辯。
(三)、主要參考資料:
(1)機床夾具圖冊P18~19 孟憲棟等主編 機械工業出版社
(2)巧改機床 陳榕林 張磊 編著中國農業機械化出版社
(3)金屬切屑機床 上、下冊 顧熙賞等主編 上??萍汲霭嫔?
(4)組合機床設計手冊 機械工業出版社
(5)機電傳動與控制 鄧星鐘等 華中理工大學出版社
(6)新編機械設計手冊 徐生 機械工業出版社
(7)機械可靠性設計 劉信主編 機械工業出版社
(8)機械設計手冊 機械工業出版社
(9)機床夾具設計 龔定安等 西安交通大學出版社
(10)機床夾具設計 李慶壽 機械工業出版社
(11)機床設計圖冊 華東五高校編 華東科技大學出版社
(12)機電一體化系統設計手冊 楊黎明 主編 國防工業出版社
教研室負責人
指導教師 王安民(教授)
接受設計論文任務開始執行日期 2008 年 3 月 17 日
學生簽名 廖志華
茂 名 學 院
畢業設計說明書
題 目: 法蘭盤斜孔和徑向孔加工臥、斜軸
回轉分度鉆床夾具的設計
英文并列題目: The Design of the Rotary-Drilling Fixture of the Horizontal and Inclined Shaft about Flange of the Slanting-Holes and Radial Holes Machining
學院 機電工程學院 專業 機械設計制造及其自動化
班級 機電04-2班 學生 廖志華
指導教師(職稱) 王安民 (教授)
完成時間 2008年 3月 17日至 2008年 6月 15日
畢業設計(論文)
開題報告
題 目
法蘭盤斜孔和徑向孔加工臥、斜軸回轉分度鉆床夾具的設計
The Design of the Rotary-Drilling Fixture of the Horizontal and Inclined Shaft about Flange of the Slanting-Holes and Horizontal Radial Holes Machining
學 院
茂名學院
年 級
2004級
專 業
機械設計制造及自動化
學 號
04024020214
姓 名
廖志華
指導教師
王安民(教授)
2008年 3 月 17日
畢業設計(論文)開題報告
題目
法蘭盤斜孔和徑向孔加工臥、斜軸回轉分度鉆床夾具的設計
時 間
2008年 3月 17日至 2008年 6月 15 日
本課題的目的意義
(含國內外的研究現狀分析)
機床夾具是機械制造工藝系統重要的組成部分,其實現工件定位和夾緊; 使工件加工時相對于機床刀具有正確的位置; 以保證工件的加工精度。其質量的高低直接影響到零件制造的質量、工人的勞動強度、產品成本和生產率。通過機床夾具的設計,提高設計、計算、分析問題和解決問題的能力,綜合運用計算機繪圖能力、表達技術問題的能力以及開拓創新的能力等。通過本夾緊機構的設計進而掌握一般機床夾具的一般方法、步驟和技巧,從而達到掌握一般機械的設計方法和技巧,綜合運用所學的知識來解決工程實際問題。
機床夾具是用以裝夾工件和引導刀具的附加裝置。主要用于金屬切削加工,在機床與工件、刀具之間起橋梁作用,是工藝系統中的一個重要環節。它可準確地確定工件與刀具、機床的相對位置,確保加工質量;它可以提高生產效率,確保勞動強度;它可以擴大或改變機床的使用范圍等。因此,機床夾具是保證機械加工工藝過程正常進行的技術硬件之一。
綜上所訴,需要對零件進行夾具設計。
設計(論文)的基本條件及設計(論文)依據
零件圖1張,材料為45鋼
設計夾具的主要依據
(1) 根據給定的生產量大小來確定夾具類型。
(2) 根據本單位的先有生產條件,注意充分發揮現場技術條件手段和技術力量的潛力來設計夾具。
本課題的主要內容、
重點解決的問題
主要內容:
(1)設計該零件鉆孔的專用夾具
(2)繪制毛坯圖1張
(3)繪制裝配圖1張及零件圖若干張
(4)完成設計說明書一份,書寫格式符合茂名學院本科生畢業設計格式規范
(5)完成外文翻譯一份,內容與畢業設計相關,且不少于5000字符
重點解決問題:在保證零件加工質量前提下,提高生產效率,降低消耗,以取得較好的經濟效益和社會效益.
本課題欲達到的目的或預期研究的結果
畢業設計是學生完成本專業教學計劃的最后一個極為重要的實踐性教學環節,是使學生綜合運用所學過的基本理論、基本知識與基本技能去解決專業范圍內的工程技術問題而進行的一次基本訓練。這對學生即將從事的相關技術工作和未來事業的開拓都具有一定意義。
其主要目的:
一、 培養學生綜合分析和解決本專業的一般工程技術問題的獨立工作能力,拓寬和深化學生的知識。
二、 培養學生樹立正確的設計思想,設計構思和創新思維,掌握工程設計的一般程序規范和方法。
三、 培養學生樹立正確的設計思想和使用技術資料、國家標準等手冊、圖冊工具書進行設計計算,數據處理,編寫技術文件等方面的工作能力。
四、 培養學生進行調查研究,面向?qū)嶋H,面向生產,向工人和技術人員學習的基本工作態度,工作作風和工作方法。
計 劃 進 度
時 間
工 作 內 容
備 注
2008.3.20~2008.4.6
2008.4.7~2008.4.20
2008.4.21~2008.5.4
2008.5.5~2008.5.18
2008.5.21~2008.6.8
課題資料收集、寫開題報告
夾具的方案設計
工序設計與夾具方案的確定
夾具設計與繪制裝配圖及零件圖
畢業論文的撰寫整理及排版打印
指
導
教
師
意
見
指導教師簽名:
年 月 日
先進制造與自動化技術的發展
1 我國制造業面臨的挑戰
世紀之交,世界的政治、經濟和技術發生了前所未有的巨大變化,經濟全球化正在形成。信息技術對制造業產生了極其深刻和全面的影響,使制造業的發展打上了明顯的信息化烙印。經濟全球化和信息化使制造業的競爭環境、發展模式及運行效率與活動空間等發生了深刻變化,這些變化對我國制造業提出了嚴峻的挑戰,同時也為實現我國制造業的跨越式發展提供了有利條件和機遇。
1.1 制造業競爭環境的變化
隨著經濟全球化進程的加快,出現了新的國際分工格局:發達國家主要發展知識密集型的高新技術產業和服務業,而把勞動和資源密集型的產業向發展中國家轉移。經濟全球化的浪潮和我國加入WTO,使我國正在逐步成為世界的重要制造基地??鐕?guó)公司紛紛在我國投資建立企業和技術中心,國外產品大舉進入中國。這使產品的市場競爭更加激烈,也使得我國制造企業必須直接同跨國公司在技術、資源、人才等方面進行正面競爭。面對如此嚴峻的挑戰,我國制造業只能背水一戰,加快技術升級的步伐,提高企業綜合競爭能力。
1.2 制造業發展模式的變化
信息化提高了生產要素的信息屬性,促使企業競爭模式從自然資源和人力的競爭轉向創新能力和創造高附加值產品的競爭;信息化使得知識的重要性凸顯,人才成為競爭優勢的重要因素;信息化促使企業管理由金字塔型結構向扁平型結構轉變。經營思想由粗放型向集約型轉變,出現了各種先進制造模式,如并行工程、敏捷制造、網絡化制造和虛擬制造等,為我國企業向先進制造模式轉變、提升我國制造企業的水平和能力提供了可以借鑒的模式。
1.3 制造企業運行效率與活動空間的變化
信息化促進了國際金融市場的快速發展,不僅保障了跨國經濟活動的正常運行,而且提高了資金在全球的流動速度;信息化可以大大縮短產品上市時間,提高產品質量,降低生產消耗和交易成本,提高資源利用率,從而大幅度提高制造企業的效率;信息化使企業在規模、經濟實力和創新能力等方面得到了空前的發展,跨國公司的力量進一步加強;信息化和經濟全球化打破了國界的阻隔,跨國經營日益普遍,國際貿易高速增長,國際投資日趨活躍,為企業發展創造了廣闊空間。
我國的制造業在國民經濟中占有重要的地位,在工業化的進程中又同時面;臨著信息化的艱巨任務。中共中央提出的“用信息化帶動制造業現代化,用高新技術改造制造業,以實現制造業跨越發展”戰略,為我國發展先進制造與自動化技術指明了方向。
2 我國制造業存在的主要差距
由于我國工業化進程起步較晚,與國際先進水平相比,我國的制造業和制造技術還存在著階段性差距。為了迎接經濟全球化和信息化的挑戰,迫切需要解決以下幾方面的問題。
a.產品創新能力較差,開發周期較長。我國機械制造業的新產品貢獻率約為18.09%(20O0年),而美國已經達到52%左右(1995年)。我國大中型企業生產的 2 000多種主導產品的平均生命周期為10.5年,是美國同類產品生命周期的3.5倍。
我國有8O%以上的企業生產能力利用不足或嚴重不足,但同時每年還要進口數以千億美元國內短缺的產品。
b.制造工藝裝備落后,成套能力不強。我國大多數企業目前還采用較落后的制造工藝與技術裝備進行生產,優質高效低耗工藝的普及率不足10%,數控機床、精密設備不足 5%,配有國產數控系統的中檔數控機床不超過 25%,高檔數控機床的90%以上依賴進口;我國在大型成套裝備技術方面嚴重落后, 100%的光纖制造裝備、85%的集成電路(IC)制造裝備、 80%的石化裝備、 70%的轎車工業裝備都依賴進口。
C.生產自動化和優化水平不高,資源綜合利用率低。我國平均勞動生產率為0.263萬美元,而美國、日本和印度分別為9.37萬美元、10.47萬美元和0.34萬美元;我國的能源綜合利用率僅為32%左右,比國外的先進水平低IO多個百分點;我國每萬元國民生產總值的能耗比發達國家高4倍多,主要產品單位能耗比發達國家高30%~90%,工業排放的污染物超過發達國家1O倍以上。
d.企業管理粗放,協作能力較差,國際市場開拓能力弱。我國多數企業缺少現代化管理的概念、方法和手段,眾多的企業尚處于經驗管理階段,企業機構臃腫,富裕人員一般多達 3O%~ 4O%。我國機械工業的專業化水平僅為15%~30%,而美國、西歐諸國、日本企業的專業化水平已經達到75%~95%,小而全、大而全的“莊園式企業”缺乏快速響應市場需求的能力。經過20多年的努力,我國出口商品占世界市場份額從0.5%提高到目前的3.5%,但是根據近3年的統計數據分析,高附加值和高技術含量的出口商品僅占我國出口商品總量的10%左右。
e.戰略必爭裝備和競爭前核心技術的開發相對薄弱。戰略必爭裝備涉及國家安全和經濟命脈,對國民經濟有重大影響。競爭前核心技術在未來的國際競爭中有可能開拓新的廣闊市場或成為新的重大關鍵技術。例如:用于海洋資源開發的水下作業裝備,用于高精尖設備制造的超精密加工裝備,面向IT等產業的集成電路制造關鍵裝備,對未來許多行業將產生重大影響的微機電系統(MEMS)以及集高技術于一身的仿人形機器人等。由于國外的技術封鎖,這些裝備和技術是花錢也很難買到的,必須靠自己的力量加以解決。
綜上所述,我國的制造業和制造技術還不能很好滿足國民經濟發展和參與國際競爭的需要。不解決上述問題,中國的制造業就不能在激烈的競爭中生存和發展。為了使我國制造業在國內、國際市場競爭中立于不敗之地,為了盡快形成我國自主創新和跨越發展的先進制造技術體系,積極發展和應用先進制造與自動化技術刻不容緩,勢在必行。
3 先進制造與自動化技術發展現狀
世界各國十分重視發展先進制造與自動化技術,許多跨國公司應用先進制造與自動化技術實現了設計、制造后理和經營的一體化,加強了在國際市場的壟斷地位。例如,美國波音公司在波音777客機的研制中,由于使用了先進的產品開發設計技術,使開發周期從過去的8~9年縮短到4.5年,縮短了40%以上。成本降低25%,出錯返工率降低75%,用戶滿意度也大幅度提高。美國通用汽車公司應用現代集成制造系統技術,將轎車的開發周期由原來的48個月縮短到了24個月,碰撞試驗的次數由原來的幾百次降到幾十次,應用電子商務技術降低銷售成本 10%;美國 Exxon- Mobil石油公司應用先進的綜合自動化技術后,使企業的效益提高5%~8%,勞動生產率提高例%~15%;機器人技術與自動化工藝裝備的核心技術一直受到世界各國的重視,面向未來服務的水下機器人、微機器人。醫用機器人、仿人形機器人等特種機器人,面向國防、航空、航天等方面的超精密加工裝備,面向基礎設施建設的智能化大型工程機械,面向制造業的高精度、高效率、低成本和高柔性基礎制造裝備等已成為目前的研究開發重點。先進制造與自動化技術已經成為帶動制造業發展的重要推動力。
為了占領先進制造與自動化技術的制高點,許多國家提出了跨世紀的研究計劃。例如,美國政府提出了《美國國家關鍵技術》、《先進制造技術計劃》、《敏捷制造與制造技術計劃》和《下一代制造(NGM)》等計劃;在歐共體的《尤里卡計劃(EURE-KA)》、《信息技術研究發展戰略計劃(ESPRIT)》和《第五屆框架研究計劃》中,與先進制造技術有關的項目占有相當大的比重;德國政府提出了《制造2000計劃》、《微系統2000計劃》和《面向未來的生產》等計劃;日本的《智能制造系統計劃》、《極限作業機器人研究計劃》、《微機器研究計劃》和《仿人形機器人研究計劃》;英國的《國家納米技術計劃》(NION);韓國的《高級先進技術國家計劃》(G7計劃)等。這些國家均將先進制造與自動化技術列為重要研究?jī)?nèi)容。通過政府、企業、大學和科研院所的合作實施,這些計劃大大促進了先進制造與自動化技術的發展。
近10多年來,我國有關部門有計劃地部署了一系列國家級重點科技項目,有效地促進了我國先進制造與自動化技術的研究與應用推廣,如??萍疾拷M織實施的863計劃的CIMS主題、智能機器人主題,“九五”國家科技攻關計劃的CAD應用工程、精密制造技術開發與應用、數控技術與裝備、現場總線控制技術開發與應用、工業機器人應用、激光技術應用等重點項目;總裝備部(原國防科工委)在“九五”期間,組織實施了我國武器裝備先進制造技術的發展項目;航空。航天、兵器和機械等許多行業
和部門在“九五”期間組織實施了行業先進制造技術項目;國家計委、經貿委等部委在用高技術改造傳統產業方面也推行了一系列計劃。上述計劃和項目極大地推動了我國先進制造與自動化技術的發展。
綜觀各國先進制造與自動化技術計劃的制定和實施情況可以看到,先進制造和自動化技術的發展有其深刻的國際經濟競爭背景。這些先進制造與自動化技術計劃提出時,即以提高本國制造業的國際競爭能力、促進經濟增長和提高國家綜合實力為目標,既注重技術的超前性,更重視來自產業界的實際需求;在關鍵技術的選擇上注重系統集成技術與工藝裝備研究開發并重,通過系統技術、信息技術和自動化技術的引入,提高制造企業的競爭能力;同時也可以看到,各國在發展先進制造與自動化技術的過程中,政府通過若干計劃的實施起到了關鍵的引導和調控作用,并形成了一套有效的研究開發及推廣應用的管理機制和創新機制。
4 先進制造與自動化技術重大發展方向
目前制造業正在從以機器為特征的傳統技術時代向著以信息為特征的系統技術時代邁進,進入了一個能夠增強企業在不可預見的多變環境中生存能力的全球化敏捷制造階段。合理開發利用資源、保護生態環境、實現經濟一社會相互協調的可持續發展戰略和綠色制造成為全社會的共識。今后15年制造技術的發展將超過以往的75年。當前先進制造與自動化技術發展的主要特點是產品設計制造和企業管理的信息化、生產過程控制的智能化、生產裝備的數字化和機器人的與人和諧化。
4.1 產品設計制造和企業管理的信息化
信息技術在制造業中的廣泛應用,促進了產品設計制造和企業管理信息化程度的提高,改變了現代制造企業的產品設計、產品制造和管理模式。以并行工程、虛擬制造為代表的信息技術的應用提高了創新產品的設計制造水平,以敏捷制造、動態聯盟、企業電子商務為代表的企業管理技術的應用促進了新型制造企業的迅速發展,形成了新型的跨國企業和基于供應鏈的戰略企業聯盟。
4.2生產過程控制的智能化
生產過程的控制是典型的復雜大系統問題,提高生產過程的控制水平和生產效率是工業界急待解決的具有挑戰性的問題,采用智能化方法進行生產過程控制是一個有前途的發展方向。采用智能化技術可以解決生產過程控制中存在的強耦合、非線性和不確定性問題,從而顯著提高生產效率和產品質量。研制開發智能化的生產過程控制設備也是發展高新技術產業的重要基礎。
4.3生產裝備的數字化
信息技術的廣泛采用,提高了生產裝備的數字化程度,從而顯著提高了產品的高技術附加值。生產裝備的數字化不僅增強了產品的功能和集成能力,提高了產品的市場競爭力和經濟效益,還顯著提高了產品的可操作性、可維護性,降低了產品的運行和維護成本。發展高度數字化的生產裝備是制造企業贏得市場競爭的主要手段之一。
4.4機器人的與人和諧化
機器人集當代眾多高技術于一身,特別強調人機和諧共存。人機和諧共存是機器人進入人類未來工作和生活的基礎,已經成為公認的21世紀前沿高技術。目前重點研究的特種機器人有仿人形機器人、水下機器人、醫用機器人、服務機器人、網絡機器人、軍用機器人、農林與農副產品加工機器人等等,在航空、航天、能源、交通、海洋、生物、醫療、服務、農業、軍事和娛樂等領域具有非常廣闊的應用前景。
5 先進制造與自動化技術領域擬解決的問題
“十五”863計劃先進制造與自動化技術領域針對我國國民經濟建設的主戰場的重大需求,瞄準國際先進制造與自動化技術前沿,擬有重點地選擇能夠主導21世紀初期我國制造業發展和升級的關鍵技術和裝備,促進形成我國先進制造與自動化技術產業的群體優勢,提升我國制造業綜合競爭能力,實現制造業的跨躍式發展;擬有重點地選擇若干涉及國家安全的戰略必爭裝備和競爭前核心技術,實現局部領域的突破和跨越式發展,打破國外的技術封鎖,在國際相關高技術領域占有一席之地。
5.1 制造業信息化工程關鍵技術的研究開發和集成應用
面對經濟全球化和信息化對我國制造業的挑戰和機遇,為了增強我國制造業的綜合競爭能力,“十五”期間,本領域擬在科技部開展的“制造業信息化工程”專項行動中發揮關鍵作用。重點解決制造業信息化急需的關鍵技術及支撐系統平臺,主要包括:基于三維產品模型的CAD/CAE/CAPP/CAM/PDM系統,流程工業MES/PCS系統,基于中國先進管理模式的ERP和電子商務系統,支持整體解決方案的PLM系統,支持制造協同、資源共享與集成服務的區域制造網絡系統等。通過支持技術產品的開發和典型示范應用,促進相關軟件產品的產業化,為制造業信息化工程提供技術支撐。
5.2戰略必爭裝備和競爭前核心技術的研究開發
“十五”期間,本領域擬選擇若干迫切需要解決的戰略必爭技術與裝備和競爭前核心技術進行重點開發,主要包括:開發擁有自主知識產權的7 000m深海載人潛器,提供深海勘察作業技術裝備,為使我國贏得“藍色圈地運動”的主動權做出貢獻;突破數據庫管理系統(DBM)關鍵技術,形成自主產權的、能與主流產品相抗衡的DBM核心系統與應用套件,為我國信息化工程和信息安全提供支撐;掌握一批微機電系統(MEM)的關鍵技術,取得自主知識產權,并開發出若干MEMS器件及微系統,為MEMS在未來形成產業打下良好的基礎;突破傷人形機器人系統中的關鍵技術,研制具有自主知識產權的國際先進水平的仿人形機器人,奠定仿人形機器人應用的基礎,促進人工智能、傳感等技術的發展。
5.3基礎制造裝備與成套裝備的研究開發
“十五”期間,本領域擬重點選擇若干基礎制造裝備和成套裝備進行開發,實現產業化,主要包括:以中檔精切類數控機床裝備的產業化作為切人點,掌握數控裝備關鍵技術,塑造中國數控機床品牌,提高市場占有率;根據國防工業的具體需求,設計制造高精尖精密加工裝備,打破國外封鎖;通過整機帶動相關的機床設計技術,系統與伺服、高附加值關鍵部件以及配套工具的技術創新,全面提升國家基礎制造裝備的核心競爭力;支持典型的成套工程機械產品的信息化、智能化研究開發和示范應
用,促進我國工程機械產品的升級換代,提高國際競爭力;研制適應我國典型土層的6.3m全斷面隧道掘進機,進行實際應用,掌握自主知識產權的全斷面隧道掘進機關鍵技術,制定相關的標準和規范體系,提高國產全斷面隧道掘進機的市場占有率。
5.4先進制造與自動化前沿創新技術的研究
“十五”期間,本領域擬支持一批以原始創新和取得具有自主知識產權為目的的前沿創新技術課題研究。擬在數字化設計與制造、過程自動化、企業管理與電子商務、現代集成制造系統平臺、制造工藝與裝備、特種機器人、基礎部件與系統等7個
方面推進前沿創新技術的研究,為先進制造與自動化技術的可持續發展與創新跨越奠定技術基礎。
6 先進制造與自動化技術領域總體戰略目標與布
6.1 總體戰略目標
總體戰略目標包括:(1)面向國民經濟建設主戰場和先進制造與自動化技術發展前沿,結合重大工程和產品,積極推進具有椰沿性。前瞻性和戰晗性的高技術研究,形成有原始創新的理論方法、有知識產權的成果和技術儲備,取得發明專利、專利受理和軟件著作權登記500項以上;(2)力爭在制造業信息化、深海載人潛器微機電系統(MEMS)、數據庫管理系統(EBMS)。仿人形特種機器人、智能化工程機械和全斷面隧道掘進機(盾構)等對提升我國制造業競爭力有重大影響的共性技術與裝備以及戰略必爭裝備和競爭前核心技術方面研發出一批具有自主知識產權的創新產品:(3)在重點行業、典型區域、試點省市和骨干企業進行集成示范應用,產生顯著的經濟效益,提高我國制造業競爭力;(4)仿委立先進制造與自動化技術戰略研究體系、咨詢服務體系和研究開發基地,培養一批高水平拔尖人才,全面實施人才戰略、專利戰略與標準戰略。
6.2戰略布局
a.先進制造與自動化技術領域由現代集成制造系統技術和機器人技術2個主題組成?,F(xiàn)代集成制造系統技術主題的主要任務是:突破一批戰略性、前沿性和前瞻性的現代集成制造技術,開發一批具有自主知識產權的應用軟件系統,以若干重大行業和典型區域的集成應用為突破口,推進制造業信息化工程。機器人技術主題的主要任務是:研究開發具有戰略性、前沿性和前瞻性的機器人和自動化工藝裝備中的核心技術,在深海載人潛器、微機電系統和特種機器人等方面取得突破,為我國的可持續發展做出貢獻,促進中高檔數控裝備和大型工程機械等關鍵基礎裝備的產業化,提高制造企業的生產能力和市場競爭力。
b.先進制造與自動化技術領域的研究發展工作在內容上可分成前沿創新技術研究、產品研發與產業化、集成應用示范Xi程3個層次。前沿創新技術研究以探索技術前沿為主要目標,鼓勵原始創新,取得具有自主知識產權的技術成果;產品研發與產業化以關鍵產品的研發與產業化為重要目標,開發一批對提高我國企業競爭力有重大作用的技術和裝備,以及戰略必爭裝備和競爭前核心技術;集成應用示范工程面向我國重點行業和典型區域,利用先進制造與自動化技術領域研發的關鍵技術和產品,實施重大集成應用,取得顯著的經濟效益和社會效益。
C.先進制造與自動化技術領域的發展戰略目標充分體現了“創新跨越,精簡聚焦”的精神。在2O01年8月第一次戰略目標論證會后,先進制造與自動化技術領域先后召開了2次有地方、部門。行業及領域、主題專家參加的戰略目標研討會,逐步明確了先進制造與自動化技術領域以信息化帶動工業化,推進制造業信息化的工作主線,并將先進制造與自動化技術領域的主要工作內容整合到科技部“制造業信息化關鍵技術研究及應用示范工程”(簡稱“制造業信息化工程”)重大專項中。制造業信息化工程將通過信息技術、自動化技術、現代管理技術等與制造技術相結合,帶動產品的設計制造方法和工具創新、企業管理模式的創新、企業間協作關系的創新,實現產品設計制造和企業管理的信息化、生產過程控制的智能化、生產裝備的數字化、社會服務和咨詢的網絡化,實現用信息技術改造我國傳統產業和以信息化帶動工業化,促進提升我國制造業的綜合競爭能力。
d.先進制造與自動化技術領域?qū)⒏鶕?jù)國際先進制造與自動化技術的最新發展動向和國家的實際需求,動態地調整領域的布局和研究?jī)?nèi)容。為此先進制造與自動化技術領域?qū)l(fā)展戰略研究作為一項長期的任務來抓,組織專門的戰略研究小組,不斷調整先進制造與自動化技術領域規劃,本領域的布局和課題的設置更切合實際。
科技譯文
Improved Workpiece Location Accuracy Through Fixture Layout Optimization
Abstract
Inaccuracies in workpiece location lead to errors in position and orientation of a machined feature on the workpiece. The ability to accurately locate a workpiece in a machining fixture is strongly influenced by rigid body displacements of the workpiece caused by elastic deformation of loaded fixture-workpiece contacts. This paper presents a model for improving workpiece location accuracy in fixturing. A discrete elastic contact model is used to represent each fixture-workpiece contact. Reduction in workpiece locating error due to rigid body displacements is achieved through optimal placement of locators and clamps around the workpiece. The layout optimization model is also shown to improve the overall workpiece deflection and reaction force characteristics.
1.Introduction
The accuracy of location of a machined feature depends on the machining fixture’s ability to precisely locate the workpiece relative to the machine tool axes. Workpiece location in a fixture is significantly influenced by localized elastic deformation of the workpiece at the fixturing points. These deformations are caused by the clamping force(s) applied to the workpiece. For a relatively rigid workpiece the localized elastic deformations cause it to undergo rigid body translations and rotations which alter its location with respect to the cutting tool. It is therefore important to minimize such effects through optimal design of the fixture layout.
Previous work in fixture layout optimization has focused on the use of finite element and rigid body models. Menassa and DeVries [1], Rearick et al. [2], Trappey et al. [3], and Cai et al [4] used finite element models of the fixture-workpiece system as input to the layout optimization. In these works the fixture layout design is formulated as a constrained nonlinear optimization problem. The goal is to determine the positions of locator-clamp pairs that will minimize a nonlinear function of the elastic deformation at selected points on the workpiece. Such a formulation requires solution of the complete finite element model during each iteration of the optimization process. Hence, the technique is computationally intensive.
DeMeter [5] presented a min-max algorithm to determine the optimal fixture layout and clamping force intensity that minimizes the maximum contact force. In this study the workpiece and fixture were assumed to be perfectly rigid. Such a formulation does not allow the effect of workpiece displacement on locating errors to be minimized directly. Recently, Gui et al [6] reported a model for improving workpiece location accuracy by optimizing the clamping force. They model the elasticity of fixtureworkpiece contacts using linear springs of known stiffness. However, methods for determining the contact stiffness are not addressed. In addition, the fixture layout is assumed fixed for a given workpiece and cutting force system.
This paper presents a method that directly minimizes workpiece location errors due to localized elastic deformation of the workpiece at the fixturing points by optimally placing the locators and clamps around the workpiece. The method considers the fixtureworkpiece contact to be linearly elastic and uses closed-form contact stiffness models derived from well-known contact mechanics problems. Also, the method outlined here is computationally less intensive than the finite element approach.
The following sections give details of the underlying models and constraints used to formulate the fixture layout optimization procedure. Model simulations are presented to demonstrate the ability of the method to minimize workpiece location errors through optimal arrangement of locators and clamps.
2.Fixture Layout Optimization
Fixture layout optimization requires formulation of an objective function and constraints. In this paper our objective is to minimize the effect of localized elastic deformation of the workpiece at the fixturing points on workpiece location. As stated earlier, the elastic deformations cause the workpiece to undergo a rigid body motion, which in turn shifts the workpiece location. The objective function for optimization is constructed as follows. Objective Function Formulation. Consider a solid rectangular workpiece held in a fixture consisting of several locators and clamps (see Figure 1). The fixture is typically very rigid compared to the workpiece. It can hence be assumed that the locators do not undergo any rigid body displacement. In contrast, forces acting on the workpiece at the locating and clamping points cause the workpiece to translate and rotate in the global coordinate system. Assume that the rigid body motion of the workpiece due to normal and tangential elastic deformations at the ith fixturing point is given by vector δ i=[δ δ δ ] xiyizi T . Note that the components of δ i are expressed in the local coordinate system fixed to the ith point. Geometric transformations are applied so that the rigid bodymotion due to deformation at the ith fixturing point is expressed in the global coordinatesystem as:
where Tgi is a general rotation matrix that transforms quantities expressed in the ith local coordinate system into the global coordinate system. Thus, the total rigid body motion ofthe workpiece due to elastic deformations at all the fixturing points is:
where N is the total number of locators and clamps.
In order to minimize the effect of rigid body motion on workpiece location, a quadratic objective function for fixture layout optimization can now be formulated as follows:
Note that the above expression is not an explicit function of the fixture element positions.But the rigid body motion δ i , and therefore Δ , is dependent on the fixturing forces which are in turn uniquely determined by the layout of fixturing points and elastic contact properties. Hence, changing the fixture layout changes the value of the objective function indirectly.
Fixture-Workpiece Contact Constraints. The fixture-workpiece system is subject toseveral contact constraints that the optimum fixture layout must also satisfy. In particular, constraints specifying the geometric compatibility of elastic deformation andfrictional resistance are needed. These constraints are developed using a discrete elasticcontact modeling approach similar to that of Conry and Seireg [7], and Sinha and Abel[8].
The workpiece is assumed to be elastic in the contact region and rigid elsewhere.The fixture is assumed to be completely rigid. At each fixturing point a square contact surface tangent to the fixture and workpiece surfaces is assumed. The contact surface isdiscretized into a grid containing M square elements as shown in Figure 2. A distributed normal force of intensity p ji and a distributed friction force of intensity (q) (q) xjiyj2 i 2 +are assumed to act across an arbitrary element j of the ith contact surface. The total normal ( Pi ) and friction (Qi ) forces acting at the ith fixturing point are then given by:
The localized deformation at a fixturing point causes distant points in the workpiece to undergo a rigid body motion in the normal direction given by δ zi . If s ji isthe initial separation of the fixture and workpiece surfaces for the jth element at the ith fixturing point, the normal deformation, wji , must satisfy the following contact condition[9]:
The equality sign applies to points that lie inside the equilibrium contact area and the
inequality sign for outside points.
Orthogonal components of tangential deformation, uji and v ji , produced by the frictional forces acting at a fixturing point lead to tangential rigid body motions δ δ xiy, i ,respectively. The deformation and rigid body motion should satisfy the following geometric compatibility conditions [9]:
where the equality and inequality signs apply for slip and no slip cases, respectively.
Contact Deformation Model.The workpiece is assumed to be a linear elastic solid in the vicinity of the fixturing points. Hence, by linear superposition, the normal deformation in the jth element of the ith contact region can be written as:
where e e e jknjkxjk, , y are the flexibility influence coefficients for deformation in the normal direction due to fixturing forces in the normal (n) and tangential directions (x, y).Similarly, the x and y components of tangential deformation are given by:
where are the normal and tangential flexibility influence coefficients for workpiece deformation in the local x and y directions at the ith fixturing point, respectively.
In this paper the influence coefficients are derived from closed-form solutions for
the contact compliance of an elastic half-space subjected to distributed normal and tangential loads. Details of the influence coefficient models may be found in [8, 9].
Contact Friction Constraint. Coulomb friction is assumed to apply at each fixturing point. This implies a nonlinear relation between the normal and frictional forces acting at a fixturing point, i.e., (q) (q) p xj where μ s is the coefficient of static friction for the fixture-workpiece material pair. For simplicity, a linearized version of this constraint is used:
Static Equilibrium Constraint. The workpiece must be in static equilibrium after application of fixturing forces at the selected points. This constraint is given by the following force and moment equilibrium equations:
ΣF = 0 (12)
ΣM = 0 (13)
where the forces and moments are expressed in terms of the elemental normal ( p ji ) and tangential forces ( qxji , qyji ) acting at the contact surface for each fixturing point.
Clamping Force Constraint. When the clamping force applied by the clamps isspecified, it is necessary that the sum of the elemental normal forces at the clampingpoint equal the specified force. This constraint is expressed as follows:
where C is the number of clamps in the fixture. In this paper the clamping force isassumed to be known. In general however the clamping force could be treated as adesign variable in the layout optimization process [5].
Fixture Element Position Constraints. The fixture layout optimization procedure seeksto find the optimal locations of the fixturing points. In general, fixture element positionson a workpiece datum surface cannot be chosen randomly and are often constrained bythe geometric complexity of the workpiece surfaces, size and location of the features tobe machined, and other process related issues. Hence, the position of a fixture element isrestricted to a bounded region on the datum surface. In this paper each fixture elementposition is constrained to lie inside a convex polygonal region. A sequence of orderedstraight edges represents each convex polygon. Mathematically, the system of linearinequalities constructed from the line equations for all ordered edges (for N fixturingpoints) is used to specify the bounded region:
A X C p p p ≤ (15)
Where
And
The elements of Ai and ci are coefficients of the line equations of the polygon edges usedto specify the polygon boundary for the ith point, xi is the position vector (global) to the ithpoint on the workpiece surface, and li is the number of ordered edges making up thebounding polygon for the ith point.The above inequalities can now be used to easily establish the location of afixturing point relative to its polygon boundary. Points inside or on the boundarycompletely satisfy the above inequalities whereas points outside the bounded region do not [10].
Layout Optimization Model. The complete fixture layout optimization problem cannow be formally stated as follows:
Minimize :
Subject to:
Bounds: pji ≥ 0
i = 1, …, N; j = 1, …, M; k = 1, …, C
Note that the normal compatibility constraint has been multiplied by -1 to convert it intoa ≤ type inequality. Also, by definition, the friction force components qxji and qxji lie inthe contact surface plane, and p ji is assumed to be positive when directed into the9workpiece surface.
3.Solution Method
A nonlinear programming method is used to solve the above layout optimizationproblem. Specifically, Zoutendijk’s method of feasible direction [11] is used. Thismethod is similar to that used by DeMeter [5] and involves the solution of the followinggeneral nonlinear program:
Minimize f(x)
Subject to Gx ≤ b (linear inequality constraint)
H(x) = 0 (nonlinear equality constraint)
Ex = e (linear equality constraint)
where x is the feasible solution. For the nonlinear program given in equation (16) the
solution x =[F δ X ] pT
where:
Note that in addition to position of the fixturing points, Xp, the solution procedure treats
the fixturing forces F and rigid body motion δ also as design variables during theoptimization process. This is because the fixturing forces and rigid body motion dependon the fixture layout and are determined uniquely for each layout by the physics of theproblem.
The first linear inequality constraint is constructed by combining all the inequality constraints given in equation (16). The second nonlinear constraint arises from themoment equilibrium equation in (16). Finally, the linear equality constraint equation isconstructed by combining all the equality constraints listed in (16). For the problem athand, G, H, and E result in matrices with the following sizes: [(4MN+N liiN= Σ1) x(3MN+6N)], [3 x (3MN+6N)], and [(3+C) x (3MN+6N)]. Note that x is a [(3MN+6N) x1] column vector.
The method of feasible directions solves the nonlinear program by moving from a initial feasible solution to an improved feasible solution. This is accomplished in four steps: a) find initial feasible solution, b) determine line search direction, c) determine step size, d) solve quadratic program. By iterating between steps (b) and (d) furtherimprovements in the feasible solution can be obtained. Mathematical details of step (b)through (d) can be found in reference [11].
The initial feasible solution x is obtained by solving the elastic fixture-workpiececontact model for the initial layout. This is done by minimizing the total complementaryenergy for the fixture-workpiece system. Details of the solution procedure andexperimental validation can be found in [7, 8, 12]. Note that the contact model needs tobe solved only once at the beginning to obtain the initial feasible solution. Thereafter,the layout optimization model relies on the contact constraints and the contactdeformation model to compute valid rigid body displacements and fixturing forces.
4.Results and Discussion
The fixture layout optimization model and solution algorithm has been implemented in MATLAB (version 5.0). The capability of the model is illustrated through an example. Consider the initial fixture layout shown in Figure 3. This layout uses a "4-2-1" location scheme with two simultaneously actuated hydraulic clamps to hold the workpiece against the locators. Table 1 lists the positions and orientations of thefixture elements in the initial layout. Locators L1-L4 and clamps C1-C2 have sphericaltips while locators L5-L7 have small area planar tips (area = 63 mm2). A clamping forceof 703 N is assumed to act at each clamping point. The workpiece is a 127mm x 127mmx 382 mm block of Aluminum 7075-T6. The Young's modulus (E) and Poisson’s ratio(ν) for the workpiece are 70.3 GPa and 0.354 respectively, and 201 GPa and 0.296respectively for the fixture elements.
The initial feasible solution vector x is computed by solving the fixture-workpiececontact model for the initial fixture layout using the minimum complementary energymethod. The layout optimization problem is then solved using the four step iterationprocedure outlined in the previous section. The fixture element position constraints usedfor this problem are given in Table 2. The improved fixture layout that minimizes the11effects of rigid body motion is given in Table 1. The objective function value is reducedfrom 528 μm2 to 426 μm2.
The impact of the optimization process on the fixture layout is shown in Figure 4.The initial fixture layout was intentionally designed to violate well-known empirical“l(fā)ocating rules” [13]. For instance, it is standard practice to position the locators on adatum surface as far apart as possible. This is done to ensure the best possible locationalstability of the workpiece. In the initial layout, locators L1-L2 and L4-L7 clearly do notsatisfy this rule. Also, the initial position of clamps C1 and C2 do not provide adequateclamping stability. It is clear from Figure 4 and Table 1 that the layout optimizationmodel gives a solution that supports the empirical rules. Specifically, L1 and L2 arepushed as far apart as possible. Also, locators L4-L7 are spread out on the primarydatum plane so as to include the projected center of gravity of the workpiece inside thebounding polygon formed by joining L4-L7. This improves workpiece stability in thefixture. The new position of clamp C1 is approximately half-way between locators L1and L2. Similarly, clamp C2 and locator L3 directly oppose each other in the improved lay out.
If, for simplicity, only the normal component of rigid body motion ( δ z ) isconsidered, it can be shown through suitable geometric transformations that the locationerror, Ep, of a point P on the workpiece is reduced by the optimization process surface(see Figure 5). For instance, the location error of the point (30, 100, 19.1) decreases from15.3 μm for the initial fixture layout to 11.7 μm for the improved layout. Thus, thefixture layout optimization model and solution procedure described above improve workpiece location accuracy by minimizing the effect of workpiece rigid bodydisplacement.
Finite Element Analysis. In order to further analyze the effect of the fixturelayout optimization process on overall workpiece deformation a finite element model wasconstructed using ANSYS? (version 5.3). The locators were modeled as displacementconstraints that prevent workpiece translation in the normal direction. The clampingforce was modeled as a uniformly distributed force acting over the workpiece-clampcontact area.
The deflection of the top surface of the workpiece (i.e., the surface to bemachined) is shown for the initial and improved fixture layouts in Figures 6 and 7,respectively. The initial fixture layout shows a significant deflection gradient across thetop surface of the workpiece. Deflection magnitudes range from 0.25 x 10-4 mm to 0.76 x10-2 mm. In general a large variation in deflection magnitudes is not desirable. On theother hand, the improved fixture layout produces a relatively uniform distribution ofdeflections that range from 0.10 x 10-2 mm to 0.19 x 10-2 mm. The maximum deflectionof the top surface is much less for the improved layout (0.19 x 10-2 mm compared to 0.76x 10-2 mm). Also, the reaction forces at L1 and L2 are 638.05 N and 65.31 Nrespectively for the initial layout, and 327.20 N and 376.16 N respectively for theimproved layout. Thus reaction forces in the improved layout are more uniformlydistributed than the initial layout.
Therefore the optimization process produces a fixture layout that improves theoverall workpiece deflection and reaction force characteristics in addition to improvingworkpiece location accuracy.
5.Conclusions
The paper presented a fixture layout optimization model for improving thelocation accuracy of the workpiece when clamped in a machining fixture. Theinaccuracy in workpiece location was due to rigid body motion of the workpieceproduced by the localized elastic deformation at the fixturing points. A discretizedelastic contact model of the fixture-workpiece interaction was used to develop t