《模具專業術語》由會員分享，可在線閱讀，更多相關《模具專業術語（16頁珍藏版）》請?jiān)谘b配圖網上搜索。

1、 dowel pin 定定位位銷銷3 plate3 plate 3 板板模模a plate A板板accelerated EJaccelerated EJ 加加速速頂頂出出Act.Press 實實際際射射膠膠壓壓力力air circuit threads 氣氣路路喉喉牙牙air cylinder 氣氣壓壓行行位位air poppets 氣氣動動閥閥air vent 排排氣氣孔孔Air 氣氣頂頂all cavities&cores to be marked for steel type and hardness 所所有有的的前前后后模模鑲鑲件件需需要要標標上上材材料料和和熱熱處處理理硬硬度度al

2、len bolt 內內六六角角螺螺釘釘aluminum castingangle ground angle lifters 斜斜頂頂angle pins 斜斜導導注注angled lifters 斜斜頂頂angular cam 彎彎銷銷angular ejector 斜斜針針angular pin 斜斜導導柱柱approval sheetapproved report 確確認認報報告告approximate mold size 估估計計模模胚胚尺尺寸寸approximate tonnage 估估計計噸噸位位sprue bushing spherical radiusAre all items

3、on design ballooned?Are clotherspins shown?Are construction dowels for plates shown if required?Are construction dowels for plates shown if required?Are hydraulic cylinders sufficient size?Are insert pockets dimensioned?Are jiffy tites to customer standard?Are lifter bushings adequate?Are limit swit

4、ches to customers standard?Are limit switchies shown?Are locatin dowels dimensioned in mold?Are manifold lines shown in mold?Are pockets for lifter slides OK?Are protector pillars shown?Are water line counter bores and taps to standard?Are wire channels shown?as needed 按按需需要要b plate B板板back plate 組組

5、裝裝板板back pressure 背背壓壓baffle 冷冷卻卻棒棒Baffles clearly identified and labeled?Ball.Plungers 波波子子螺螺絲絲band heater 電電熱熱環環barrel 料料筒筒bearing 軸軸承承bed die 下下模模，底底模模bending 彎彎曲曲bite 咬咬力力black spot 雜雜物物不不良良blade ejector 板板頂頂針針blanking die 沖沖裁裁模模blast 噴噴沙沙block ejector 頂頂塊塊頂頂出出blocks 內內模模bloe hole 氣氣泡泡blow moldi

6、ng 吹吹出出成成型型body lines boostbottom board 澆澆注注底底板板bottom clamp plate 底底板板brone wear plate 青青銅銅耐耐磨磨板板burn mark 燒燒焦焦痕痕burr 披披鋒鋒cad-cam data supplied by camcam as required 按按要要求求設設計計行行位位cartridge heater 電電熱熱管管cav.Mark 型型腔腔識識別別cavity adaptor plate 固固定定側側安安裝裝板板cavity cut in plate 前前模模原原身身出出？cavity insert 型

7、型腔腔鑲鑲塊塊cavity inserted 前前模模鑲鑲件件cavity mumber 出出模模編編號號cavity mumber 穴穴位位數數cavity plate 模模仁仁板板cavity side 前前模模側側cavity stampingcavity 模模穴穴，模模仁仁，模模腔腔cavity 前前模模cell 氣氣孔孔center between KO holes 頂頂棍棍孔孔中中心心center pin 中中心心針針center sprue 中中心心唧唧嘴嘴center sprue 中中心心入入水水center support 中中心心墊墊chamfered and grinde

8、d 倒倒角角和和磨磨光光大大clam pressionclamp plate 壓壓板板clamp slotsclamp stroke 合合模模行行程程clamping block 鎖鎖定定塊塊clamping force used 注注朔朔和和噸噸位位clamping force 夾夾緊緊力力clamping force 鎖鎖模模力力clamping plate 模模板板clamping 合合模模closing angles 鎖鎖緊緊closing sequence 合合模模次次序序coil heater 電電熱熱線線圈圈coil spring 彈彈簧簧圈圈cold runner 冷冷流流道道

9、cold slug well 冷冷料料穴穴components are DME/pcscompound die 復復合合模模compound molding 復復合合成成型型compound molding 壓壓縮縮成成型型compression spring 壓壓縮縮彈彈簧簧concept mold design 模模具具概概念念設設計計圖圖紙紙conforms 一一致致connecting box 接接線線盒盒controller supplied bycool runner systemcooling channel 冷冷卻卻管管cooling circuit 冷冷卻卻管管道道cooli

10、ng 冷冷卻卻cooling/heating cavities 冷冷卻卻/加加熱熱前前模模cooling/heating cores 冷冷卻卻/加加熱熱后后模模core cut in plate 后后模模原原身身出出？core inserts 后后模模鑲鑲件件core pin 型型芯芯core pin 型型芯芯鑲鑲針針core side 后后模模側側core 后后模模crack 裂裂化化CSH.Screw 沉沉頭頭螺螺絲絲cushion 墊墊料料cycle 周周期期cylinder on EJ plate 油油壓壓缸缸在在頂頂針針板板上上cylinder unit 氣氣缸缸cylinders

11、on EJ Bardamage 打打痕痕data type 數數據據類類型型date insert 日日期期鑲鑲件件date mark 日日期期轉轉印印dater 日日期期碼碼datum lines 基基準準線線datum plane 基基準準面面deburring 細細加加工工decompressiondeformed/warpaged 變變形形density 比比重重detailed component drawings 詳詳細細零零件件圖圖紙紙die blocks die closedDie relief and vents shown and dimensioned?die slide

12、 下下模模滑滑動動裝裝置置dimple gate 波波紋紋式式direct gate 直直接接澆澆口口DME or equivalent DME 或或相相等等料料DME 規規格格?Do ejector pins miss water lines by 200?Do rail screws miss water lines by 200?Does cover or ejector block thickness have to be held?Does each heating zone have a T/C shown?Does K.O.pattern match press layout?d

13、ouble ejection 二二次次頂頂出出dowel pin of mold leg dowel pin 銷銷針針Dowes hydraulic cylinder meet N.F.P.A.standards?draft angle 脫脫模模斜斜度度draft 脫脫模模角角度度drag marks 拖拖花花driling 孔孔位位加加工工drill EJ hole 鉆鉆頂頂針針孔孔drill water core/cavity 鉆鉆運運水水孔孔drop 支支流流道道duplicating casts bydwell pressure 保保壓壓壓壓力力E.J.sleeve 頂頂出出桿桿edg

14、e gate 側側水水口口edge gate 側側澆澆口口edge tab 邊邊水水口口EDM cutting放放電電加加工工EDM electrical discharge machining 電電火火花花加加工工EDM machining 放放點點加加工工EDM master 銅銅公公Ej bars 頂頂桿桿Ej blades 扁扁頂頂針針Ej pin container plate Ej pins 頂頂針針ejctor blade 扁扁頂頂針針ejection cavities 前前模模頂頂出出ejection cores 后后模模頂頂出出ejection force 頂頂出出力力eje

15、ction half 頂頂出出側側邊邊ejection mechanisam 頂頂出出機機械械結結構構ejection rod 頂頂桿桿數數量量ejection stroke 頂頂出出距距離離ejection times 頂頂出出次次數數ejection type 出出模模形形式式ejection 頂頂出出ejectionplate springs 頂頂針針板板彈彈簧簧ejector guide pin 頂頂出出導導銷銷ejector guide pin 推推板板導導注注ejector guide 頂頂出出板板導導柱柱ejector plate 頂頂針針板板e(cuò)jector retainer p

16、late 面面針針板板e(cuò)jector sleeve pin 司司筒筒針針ejector sleeve 絲絲筒筒ejector sleeve 推推管管ejector stroke 頂頂出出行行程程ejectors not returned 頂頂針針不不回回Elec.Heaters 電電熱熱偶偶electric leakage 漏漏電電Electrical connectors and t-couples to standard?electro plating 電電鍍鍍加加工工electrode 做做電電極極elongate spring 拉拉伸伸彈彈簧簧engraving 雕雕刻刻加加工工etc

17、hing 表表面面蝕蝕刻刻even 平平坦坦expected cycle time 預預計計成成型型周周期期export wooden crate 出出口口木木箱箱Eye bolt holes size and location dimensioned?eye bolts 吊吊模?？卓譭yebolt holes 吊吊圈圈，吊吊模?？卓譮an gate 扇扇形形水水口口finish cavities 拋拋光光前前模模first shot 第第一一次次試試模模fitting and assembling 配配模模和和組組立立fitting 配配模模fittings 沉沉孔孔fix die,cove

18、r die 定定模模fixed clamping plate 定定模模底底板板fixed sidefixed transfer mold 固固定定式式傳傳遞遞模模flash chrome 鍍鍍鉻鉻flash 披披鋒鋒flexturefloating plateflow control bubblersflow mark 噴噴流流痕痕forming die 成成型型模模full round 整整圓圓full shot 充充填填galling 擦擦傷傷gas trapped 困困氣氣gas vents 排排氣氣槽槽gate inserts 鑲鑲件件入入水水gate 水水口口gear rack 齒齒

19、條條gear wheel 齒齒輪輪gibs and wear plates 壓壓條條和和硬硬片片gloss not enough 光光澤澤不不夠夠good polish 有有光光澤澤grinding 磨磨床床加加工工grip holder 夾夾頭頭guarantee shot 保保證證產產量量guarantee 保保證證產產期期guide bush導導柱柱套套guide ejections 頂頂出出導導向向guide pin 導導柱柱guide pins 邊邊釘釘guide rails 滑滑塊塊壓壓板板guided ejection 頂頂出出導導向向guided ejection 中中托托司司

20、hair flash 膠膠絲絲half round 半半圓圓hand loaded inserts 手手動動送送鑲鑲件件hardening 熱熱處處理理Hascoheal block 鎖鎖定定塊塊heat pipe 加加熱熱管管heat treatment procejure 熱熱處處理理規規范范heater connectors supplied byheater controller/connectors 熱熱嘴嘴連連接接件件heatersheel locking block 鏟鏟雞雞high polish 高高度度拋拋光光hold on 保保壓壓hose nipple 水水嘴嘴hot r

21、unner manifold 熱熱流流道道hot runner mold 熱熱流流道道模模hot runner 熱熱流流道道hot sprue bushing 熱熱唧唧嘴嘴hot sprue bushing/tip 熱熱唧唧嘴嘴hot sprue 熱熱水水口口hot stamping 熱熱壓壓hot tip 熱熱嘴嘴hydraulic cylinder 液液壓壓缸缸hydraulic slider 液液壓壓行行位位hydraulic unit 油油唧唧hydraulic/pneumatic cylindersinjection forming 注注射射成成型型injection molding

22、 射射出出成成型型injection nozzle 射射出出噴噴嘴嘴injection piston 壓壓射射沖沖頭頭injection plunger 射射出出柱柱塞塞injection press of m/c 射射膠膠壓壓力力injection 射射膠膠insert pin 嵌嵌件件銷銷Insert water dimensioned from edge of insert?insert welding 焊焊接接inserted 鑲鑲件件insets molded into part 撬撬模?？涌觟nspection report 測測量量報報告告insulated runner mol

23、d 絕絕熱熱流流道道模模insulator plates 隔隔熱熱板板inter lock 定定位位機機構構Is cavity for plugs and wires adequate?Is clearance counter bore for sleeve ext.OK?Is grease for guided ejection shown if required?Is hydraulic schematic palque shown?Is hydraulic schematic shown?Is lock angle relationship to cam pin correct?Is m

24、anifold to customers standard?Is mounting for wear plates shown?Is mounting for wear plates shown?Is plug mounting plate diagarm shown?Is timing of cam pin correct/Is water line plaque shown?kick off 標標準準KO extensions KO 連連接接件件KO holes in BCP 頂頂棍棍孔孔KO holes KO 孔孔KO holes quantity頂頂棍棍孔孔數數量量KO platter

25、n KO 排排位位Lifter water dimensioned from edge of lifter?lifter 斜斜頂頂lifters as required 按按要要求求做做斜斜頂頂lifting hole 吊吊模?？卓譴inework list of components 零零件件表表locating ring 定定位位圈圈location 定定位位lower support 下下壓壓墊墊machine nozzle radius 啤啤機機射射嘴嘴半半徑徑machine type 注注朔朔機機型型號號machining marks 加加工工痕痕跡跡manifold block 流

26、流道道板板manifold 熱熱流流板板manifold 熱熱流流道道結結構構marking 字字嘪嘪master sixze providedmaterial&heat treat certificates 材材料料和和熱熱處處理理證證書書material of cavities 前前模模料料material of cores 后后模模料料material shrinkage 材材料料縮縮水水率率mech.Slider 機機械械行行位位mechanical slider 機機械械滑滑塊塊medium polish 中中度度拋拋光光micro switchers supplied by mic

27、roswitches 微微動動開開關關milling machining 銑銑床床加加工工mold base steel 模模胚胚鋼鋼材材mold base 模模胚胚mold closing 閉閉模模速速度度mold compnents 模模具具配配件件mold drawings w/component list 模模具具圖圖和和明明細細爛爛mold flow analysis bymold layout 模模具具排排位位mold legmold opening force 開開模模力力mold plaque mold plate 模模板板mold shipping 走走模模mold try-

28、out 試試模模molded in inserts 帶帶插插件件成成型型molded part inspection bymould base steel 模模架架材材料料mould base 模模架架mould fastened,locked and stable 模模具具鎖鎖死死m(xù)ould height 模模具具厚厚度度mould life expectancy 模模具具壽壽命命mould max.size 最最大大模模具具尺尺寸寸mould trial report 試試模模報報告告moulding information 模模具具資資料料moulding machine press/t

29、ype 啤啤機機種種類類moulding material type 啤啤朔朔材材料料moulding status 成成型型方方式式moving clamping plate 動動模模底底板板moving die,ejector die 動動模模moving side MUD or equivalent MUD 或或相相等等料料multi-cavity mold must have cavity identified marks 多多腔腔數數模模具具要要有有cavity的的號號碼碼national need a valve or air assistance to break 需需要要吹吹氣

30、氣輔輔助助頂頂出出nip 夾夾溝溝nitriding氮氮化化處處理理no cav.Number 無無模模腔腔編編號號no ejection hole tapped 頂頂棍棍板板無無塔塔牙牙no return spring 無無回回針針彈彈弓弓No.of cavity穴穴數數No.of cavity穴穴數數not dries enough 干干燥燥不不足足nozzle miss fitting 卷卷唧唧嘴嘴漏漏膠膠nozzle recess nozzle 唧唧嘴嘴o ring 密密封封圈圈offset leader pinoil dirt 油油污污點點oil 運運油油open nozzle 開開

31、式式注注嘴嘴opening stroke 開開模模行行程程open開開模模optical polish 電電鍍鍍拋拋光光outer slide 外外滑滑塊塊PA6+33%GF 33%glass-filled nylon part&runner 產產品品和和水水口口part drawings 產產品品圖圖紙紙part hanged 掛掛成成品品part weight 產產品品重重量量parting line locks 分分模模線線鎖鎖件件parting line 分分模模線線parting lock set 拉拉勾勾parting lock 分分模模定定位位鎖鎖perpendicularpin

32、 gate 點點水水口口pin pint gate mold plate 細細水水口口模模胚胚pin point gate 針針孔孔形形水水口口，細細水水口口pin point 點點水水口口PL 面面固固定定?plastic material&mold shrink 朔朔膠膠材材料料和和收收縮縮率率plasticizing capacity 朔朔化化能能力力plasticizing 朔朔化化plate ejector頂頂板板頂頂出出plate travelling 模模板板移移動動platen dimensions 載載模模板板尺尺寸寸platen drawing avaliable?有有無無

33、啤啤機機平平面面圖圖plating 電電鍍鍍polish cores 拋拋光光后后模模polishing 省省模模加加工工post gatepre=assembly of mould 合合模模前前檢檢查查preliminary mold layout 初初步步設設計計pre-shipment of mould 發發模模具具前前Press ite bars shown in phantom?press make&size 啤啤機機類類型型和和大大小小primary cavity 前前模模鑲鑲件件primary core 后后模模鑲鑲件件process report 進進度度報報告告process

34、 report 試試模模報報告告procomproduction cycle 注注朔朔周周期期progressive protective grease on the core and cavity 打打防防銹銹油油proximitly switchespry bar slots 頂頂出出桿桿攻攻牙牙pull bolt 小小拉拉桿桿puller pin 勾勾針針puller plate 拉拉板板QC coupler requiredQC manifold required Qre threaded pull-backs shown if required?raised 高高出出rear 尾尾部

35、部recessed 下下沉沉recycle insert 環環抱抱鑲鑲件件recycle marking 環環抱抱標標regrind 水水口口料料remains 剩剩余余料料removable inserts(hardened)硬硬化化的的互互換換鑲鑲件件retrial of the tools 重重新新試試模模return pin 回回針針Rev.ejection 反反頂頂出出rib machining 骨骨位位加加工工ring gate 環環形形水水口口robot 自自動動機機械械手手rough milling CNC cutting CNC 粗粗加加工工rough polishing 粗

36、粗拋拋光光runner/gate blocks 水水口口/澆澆口口一一起起runner hanged 掛掛水水口口runner less mold 無無流流道道模模runner lock pin 水水口口針針runner plate 流流道道板板runner stripper plate 第第二二固固定定板板runner 流流道道runner 水水口口rust 銹銹蝕蝕S.S.不不銹銹鋼鋼safety strap 安安全全板板Safety straps shown in plan views and sec.Views?safty back angle 安安全全的的復復位位角角度度safty

37、loop 保保險險圈圈sample material 樣樣件件膠膠料料scrap slotscratch 拉拉傷傷scratches 傷傷痕痕sharp pt.利利角角SHC.Screw杯杯頭頭螺螺絲絲shimship material 寄寄料料short moulding 短短射射short shot 充充填填不不良良short shot 走走水水不不齊齊shot cylinder 壓壓射射缸缸shot volume 注注射射量量shot weight 射射膠膠重重量量shot weight 射射膠膠重重量量shoulder guide bush 托托司司SHS.Screw 山山打打螺螺絲絲

38、shut off 封封膠膠side core movement 行行位位運運動動side cores 行行位位side gate mold base 大大水水口口模模胚胚side gate 側側澆澆口口side gate 側側水水口口side interlocks 邊邊鎖鎖side locks 邊邊鎖鎖silk screen 絲絲印印silver line 銀銀條條狀狀single cavity mold 單單腔腔模模具具sink mark 縮縮水水six hot drops 6點點熱熱流流道道slant ejector 斜斜頂頂sleeve ejector 司司筒筒頂頂出出sleeve 司司

39、筒筒slide action 斜斜頂頂式式滑滑塊塊slide return spring 行行位位回回復復彈彈簧簧Slide water dimensioned from edge of slide?slider not returned 行行位位不不回回slider 滑滑塊塊板板slider 行行位位spacer block 方方鐵鐵SPE/SPI?special features 特特殊殊要要求求spraying 噴噴油油spring activatedspring activated 彈彈簧簧動動作作spring loaded EJ Barspring return 回回位位彈彈弓弓sp

40、rue bush,sprue bushing 澆澆口口套套sprue bush depth 唧唧嘴嘴長長度度sprue bush radius 唧唧嘴嘴球球徑徑sprue bush 機機嘴嘴套套Sprue bushing and sphere.Rad.Fit machine?sprue bushing 唧唧嘴嘴Sprue puller pin shown and dimensioned?sprue 水水口口sprue直直流流道道standard electrodes 標標準準銅銅公公steel crate 包包裝裝箱箱steel layout 內內模模尺尺寸寸sticking cavity 粘

41、粘前前模模sticking core 粘粘后后模模sticking sprue 粘粘水水口口sticking 離離形形不不良良stock temp.料料溫溫stop bolt 定定位位桿桿stop disc 限限位位釘釘stopper block 限限位位板板stopper bolt 水水口口螺螺絲絲stopper pin 定定距距拉拉桿桿straight guide bush 直直司司stripper block 推推方方stripper pillar 推推銷銷stripper plate 水水口口板板stripper plate 推推板板sub gate in pin 頂頂針針潛潛入入su

42、b to E.J.pin 潛潛水水口口到到頂頂針針subarine gate 潛潛水水口口submarine gate 潛潛水水口口suck back 倒倒索索supplied by mold maker 模模具具廠廠要要提提供供的的support pillar 支支撐撐柱柱support pin 撐撐頭頭support pin 拉拉桿桿support plate 托托板板support spacer 方方鐵鐵surface hardness 表表面面處處理理switch position 轉轉換換位位置置tapered interlocks 錐錐度度互互鎖鎖tappered interloc

43、k 爹爹把把邊邊釘釘TBD?teeming 澆澆注注temp.contr.unit 調調溫溫機機texture 皮皮紋紋texture 咬咬花花,蝕蝕紋紋the back clampin plate the calmpin slot the in-out marking of cooling system 冷冷卻卻系系統統的的出出入入標標記記themo plastic 熱熱可可朔朔性性themoset injection 熱熱固固性性注注射射模模具具thermo set 熱熱硬硬化化性性thermocouple connectorsthermoplastic injectionthermopl

44、astic injection 熱熱朔朔性性注注射射模模具具thermoset injection 熱熱固固性性注注射射模模具具threaded EJ barthree plate type mold plate 簡簡化化形形細細水水口口模模胚胚tia bar max distance 拉拉桿桿距距離離tie bar clearance tie bar spacing 啤啤機機距距離離tie bars 導導注注tie rods 拉拉桿桿title block 標標題題攔攔tolerance of fit 配配合合公公差差tool trials 試試模模top clamp plate 面面板板t

45、op of mould 俯俯視視圖圖total mumber of cavities 模模穴穴總總數數量量transducertrapezoid 梯梯形形trapezoid 梯梯形形trial duration 總總實實模模時時間間try machine 試試模模機機tube heater 電電熱熱筒筒tubular heater 電電熱熱線線tunnel(sub-gate)潛潛水水口口type of gate 入入水水方方式式type of gating defined type of injection gate 水水口口類類型型type of runner 水水口口類類型型under c

46、ut 倒倒扣扣uneven gloss 光光澤澤不不均均unscrewing(auto)自自動動脫脫螺螺紋紋unscrewing 脫脫螺螺紋紋upper support 上上壓壓板板use water-proof plastic sheet 用用朔朔料料防防水水薄薄膜膜封封死死UV test 紫紫外外光光valve gate 針針閥閥水水口口valve nozzle 閥閥式式注注嘴嘴velosity 射射膠膠速速度度vent 通通氣氣孔孔venting 排排氣氣virgin 原原料料warm runner mold 溫溫流流道道模模warpage 變變形形water cooling threa

47、ds 運運水水喉喉牙牙water cooling 水水冷冷卻卻系系統統water fittings 運運水水water leakage 漏漏水水water lines connector type 水水平平線線連連接接器器water threads 運運水水塞塞waterline not marked 無無運運水水字字嘪嘪wear plates 滑滑塊塊固固定定板板wear plates 耐耐磨磨板板weld line 夾夾水水紋紋white mark 頂頂白白wire cutting 線線切切割割加加工工with antirust grease oil 有有防防銹銹油油work harden

48、ing 加加工工硬硬化化work lines zero corners zero side zhinc die cast 曬曬紋紋?水水路路規規格格?PT?NPT?外外觀觀無無段段差差?core plate 下下模模模模板板backhaul switch 回回程程開開關關U-coupling 斜斜頂頂導導行行塊塊insulate plate 隔隔熱熱板板plug 水水嘴嘴interlock 方方形形輔輔助助器器top clamp plate 上上碼碼模模板板bottom clamp plate 下下碼碼模模板板lifting strap plate 吊吊模模板板space block 限限位位

49、塊塊puller pin 拉拉料料銷銷slide guide plate 壓壓塊塊wear block 耐耐磨磨塊塊angle pin 寫寫導導柱柱flat pin 扁扁頂頂針針core plate 下下模模鑲鑲件件cavity plate 上上模模鑲鑲件件sub-insert 小小鑲鑲件件core sub-insert 下下模模小小鑲鑲件件cavity sub-insert 上上模模小小鑲鑲件件slide insert 行行位位鑲鑲件件gib 壓壓條條jaw 壓壓緊緊塊塊(鏟鏟機機)wedge 斜斜機機S.H.C.S.杯杯頭頭螺螺絲絲plate 壓壓條條coupling 管管接接頭頭lock

50、 plate 鎖鎖模模塊塊side lock 平平行行鎖鎖wedge wear plate 油油板板angle pin 斜斜邊邊KO rod 頂頂棍棍support pillar 模模頂頂guide block 青青銅銅T-gib T型型導導槽槽side core starting block 行行位位壓壓條條mold lock block 鎖鎖模模塊塊ejector clamping plate 頂頂針針碼碼板板e(cuò)jector guide pin 中中管管邊邊dowel pin 頂頂位位銷銷side cotter block 鏟鏟機機runner bar水水口口鐵鐵upper runner

51、bar 上上模模水水口口鐵鐵lower runner bar 下下模模水水口口鐵鐵sprue puller pin 水水口口勾勾針針side lock 直直身身鎖鎖inter lock 斜斜度度鎖鎖safety bar 鎖鎖模模板板plug 喉喉塞塞baffle 隔隔水水板板ball-catch 波波子子螺螺絲絲thermocpuple 探探熱熱針針stripper bolt 限限位位螺螺絲絲cover plate 蓋蓋板板hydraulic cylinder 油油唧唧leader pin 導導柱柱bushing 導導套套stripper plate 熱熱板板e(cuò)jector retainer

52、plate 頂頂針針底底板板retainer plate 墊墊板板core pin 模模芯芯針針stop pin 拉拉圾圾釘釘shoulder ejector pin 有有托托頂頂針針guide ejection bushing 頂頂針針板板導導套套guide ejcetion leader pin 針針板板導導柱柱extension nozzle bushing 三三板板模模延延伸伸式式唧唧嘴嘴runner stripper plate bushing 水水口口板板導導套套locating ring 定定位位圈圈(法法蘭蘭)dowel pin 定定位位銷銷(管管釘釘)tubular dowe

53、l 管管狀狀管管釘釘safety hoist ring 吊吊環環dating insert 日日期期印印recycling insert 環環保保印印air poppet valve 氣氣頂頂runner shut-off insert 截截水水口口鑲鑲件件early ejector return 早早回回shut off 摖摖傷傷stress mark 頂頂白白filling uneven 走走水水不不平平均均short shot 走走不不齊齊air trapping 困困氣氣tairipro pp resin consolidated property dat sheet 臺臺化化聚聚丙丙

54、烯烯朔朔膠膠粒粒物物性性總總表表tensile strength at yield 降降伏伏點點抗抗張張強強度度tensile elongation at break 斷斷裂裂點點延延伸伸率率flexural modules 彎彎曲曲模模數數izod impact strength 沖沖擊擊強強度度heat deflection temperature 熱熱變變形形強強度度molding shrinkage 收收縮縮率率specific gravity 比比重重FDA compliance flat yarn 扁扁沙沙級級homo=polymer 單單聚聚物物multi-filament 纖纖維維級級random copolymer 隨隨意意共共聚聚物物extrusion&blow molding 擠擠出出吹吹制制級級impact copolymer 耐耐沖沖擊擊共共聚聚合合物物general pupose 通通用用級級