壓縮包內含有CAD圖紙和說明書,均可直接下載獲得文件，所見所得，電腦查看更方便。Q 197216396 或 11970985
目錄
1 在濕空氣中氧化的可降解的印染廢水 1
1.1 概述 1
1.2 理論 1
1.3 實驗 2
1.4 結果及討論 3
1.5 結論 5
1 ON THE DEGRADABILITY OF PRINTING AND DYEING
WASTEWATER BY WET AIR OXIDATION 6
1.1 INTRODUCTION 6
1.2 THEORY 7
1.3 EXPERIMENTAL 8
1.4 RESULTS AND DISCUSSION 8
1.5 CONCLUSIONS 11
2 鎂氯化物使顏料及工業顏料廢物的轉移 13
2.1 概述 13
2.2 材料及方法 15
2.3 結果及討論 16
2.4 結論 19
2 REMOVAL OF DYES AND INDUSTRIAL DYE WASTES BY
MAGNESIUM CHLORIDE 21
2.1 INTRODUCTION 21
2.2 MATERIALS AND METHODS 23
2.3 RESULTS AND DISCUSSION 25
2.4 CONCLUSION 30
31
1 在濕空氣中氧化的可降解的印染廢水
摘要——用第一次序的動力學模型來修正濕空氣氧化中的印染廢水的模擬與實驗的數據吻合，結果指出印染廢水的一個有機污染物質的特定分?jǐn)?shù)是無法離開甚至是提高了溫度而且延長了反應時間的，發現能不依賴溫度和使用改良催化劑的可以降解的有機物質。
關鍵字：濕氣氧化，廢水治療, 催化劑
1.1 概述
紡織廢水從印刷和染色程序后放出，具有高化學需氧量 (COD) 、低的生物化學的需氧量 (BOD) 和深色度的特點。 它是紡織工業中污染物質的主要來源之一。在個別項目中，廢水的COD和色度用傳統的廢水處理是很難達到預期效果的。 濕空氣氧化法 (WAO) 已經被實驗證實是一個能在提高的溫度和壓力把有機污染物質轉換成水和二氧化碳的方法 (蘭德爾和 knopp,1980; Skaates et al,1981; Dietrich al,1985; Levec,1990; Mantzavinos et al。,1996)。 因?yàn)樗苓_(dá)到非常高的轉變率,濕空氣氧化程序比傳統的方法典型地需要少很多的空間。此外，在運用生物學程序的情況之下，沒有多于的泥或廢物生產。 WAO 已經用實驗證明是處理來自紡織工業的廢水的退漿、漂白、染色和印刷工藝的一個可行的程序 (lei et al，1997， 1998,2000). WAO 需要高溫 (大約 3000C) 和高壓 (超過 10 MPa), 在一個合理的時間段里達到高化學需氧量的需求。 而采用一個適當?shù)拇呋瘎┠芨淖兎磻?yīng)溫度和壓力 (Chu et al,1998; 匈牙利，1999)。
因?yàn)槿玖系慕Y(jié)構非常穩定, 所以在一般的文學中都用了第一次序反應動力學模型來模擬，而不用那個印染廢水的經驗數據(Mishra et al,1995; Ingale et al,1996; Lei et al.,2000)在這一個運用中, 第一次序反應動力學模型增加一個非可氧化性的分?jǐn)?shù)來修正過去一直研究的有機的印染廢水的 WAO。
1.2 理論
在印染工藝中產生許多不同的有機化合物包括各種不同的染料的廢水。 在這一項研究中，總有機碳 (TOC) 用來表示印染廢水有機濃度的綜合指標。Mantzavinos (1996)和lei et al (2000)證明，由于氧是過量的，則大量的轉移干擾是可以忽略的。由WAO法和假定的第一次序反應, 我們有
（1）
前提條件是
t=0; Y=Y0; （2）
Y 和 Y0是可氧化有機濃度，對應的反應時間是 t 和0；k 是比率常數, 遵循阿倫尼烏斯公式
（3）
k0為指前因子（也稱頻率因子）, E為表觀活化能， R 為摩爾氣體常量和，T為熱力學溫度。
求得（1）的微分方程解為：
（4）
在印染廢水中含有一些非可氧化性的WAO成份。假設α是可氧化有機物中TOC的分?jǐn)?shù), 則有：
(5)
TOC0 是反應時間為0時的TOC值。
TOC 價值隨時間變化的：
（6）
在任意時間轉移的TOC量為：
(7)
TOCi不同于廢水的開始 TOC值TOC0，是因?yàn)樵诩訜崞陂g廢水的熱分解不同(lei et al,2000)。
1.3 實驗
WAO實驗是在一個有冷卻裝備盤繞和一個有活潑磁性的2-l的高壓鍋系統中實行的。該設備功能和它的操作程序在我們的早先工作中是得到預期效果 (lei et al ,1997)。樣本廢水是直接從香港的一家紡織公司印染程序收集來。它有11100mg/l 的COD值， 3204mg/l 的 TOC值,BOD5為440mg/l 和pH值為6.6。
1.4 結果及討論
圖 1 為在四個不同的溫度下表示的印染廢水中 WAO與TOC轉移關系,分別為1500C、2000C、2500C 和 3000C。 需氧部分壓力是2.65MPa(以2000C 為參考溫度), 是理論總需氧量的兩倍。
實驗的數據體現出當符號和樣板的配件為使用最少的正方形方法時當做標準線。TOC 的轉移在 t 0 時有非零值。這是因?yàn)樵诔绦蛏系臒峤膺^程中有一些廢水進行了熱分解 (lei et al,2000)。 熱的分解在較高的溫度中表現得更重要。圖1中模型和實驗的數據反映得很好。 要選取的參數在表 1 中清楚的列出。 可氧化的有機印染廢水的分?jǐn)?shù)α，大約為0.35時幾乎不受溫度的影響。這意味著只有大約 35% 的有機物在熱分解之后才能被氧化。 增加溫度能加速氧化速度但是不能夠增加有機物被氧化的分?jǐn)?shù)。
反應率常數在各種不同的溫度下獲得氧化反應的活化能的理論值是 43.7 kJ/mol (圖 2) 。 活化能比 25 kJ/mol大很多, 其值對于轉移阻能可被忽略 (Satterfield,1991; Shende 和 Mahajani,1994).。在動力學控制之下假定的印染廢水WAO，是包括完全被供應的過度氧量的模擬值。
因?yàn)橛袡C(jī)印染廢水轉換率不能夠由增加溫度 (常數α)以及嘗試使用一些催化劑而提高或改善氧化率。 圖 3表示在2000C接觸反應的 WAO和2.65 MPa 的需氧部分壓力下的印染廢水的實驗數據 (符號)。
催化劑是濃度為200mg/l 的Cu(NO3)2 和 CuO，Cu2+。兩種催化劑能明顯地提高氧化率而且達成較好的 TOC 轉移率。相應的模型如圖3，而且模型與實驗數據表現得極一致。動力學參數α和k,對于Cu(NO3)2是 0.434 和 0.0559/min, 對于CuO是 0.435 和 0.0492/min。當沒有催化劑作用的時候，CuO 的參數值最小，分別的相對值為 0.34 和 0.0066/min。 催化劑能同時提高可氧化有機的分?jǐn)?shù)和反應率。
1.5 結論
用第一次序的動力學模型來修正濕空氣氧化中的印染廢水的模擬與實驗的數據吻合。 因?yàn)橐恍╊伭系母叩姆€(wěn)定結構, 特定的部分有機物質在廢水中不能分離，甚至在提高溫度時也不能被氧化，而且延長反應時間。 雖然增加溫度能加速它的氧化速度，但不能夠增加而且有可能降低有機物質的比。 然而，氧化有機廢水的分?jǐn)?shù)能因增加一個催化劑而得到改良。
1 ON THE DEGRADABILITY OF PRINTING AND DYEING
WASTEWATER BY WET AIR OXIDATION
XIJUN HU*, LECHENGLEI, GUOHUA CHEN and PO LOCK YUE
Department of Chemical Engineering, Hong Kong University of Science and Technology,
Clear Water Bay, Kowloon, Hong Kong
(First received 13 January 2000; accepted in revised form 6 September 2000)
Abstract——A modified first-order kinetics model was used to study the wet air oxidation of printing and dyeing wastewater. The model simulations are in good agreement with experimental data. The results indicate that a certain fraction of organic pollutants in the printing and dyeing wastewater could not be removed even at elevated temperature and prolonged reaction time. The ratio of degradable organic matter is found independent of temperature and can be improved by using a catalyst. # 2001 Elsevier Science Ltd. All rights reserved
Key words——wet oxidation, wastewater treatment, catalyst
1.1 INTRODUCTION
The textile wastewater discharged from printing and dyeing processes is characterized by high chemical oxygen demand (COD), low biochemical oxygen demand (BOD), and heavy colour. It is one of the major sources of pollutants in the textile industry. In particular, the COD and colour of the wastewater are resistant to conventional wastewater treatment. Wet air oxidation (WAO) has been shown to be a feasible method to convert the organic pollutants into water and carbon dioxide at elevated temperatures and pressures (Randall and knopp, 1980; Skaates et al., 1981; Dietrich et al., 1985; Levec, 1990; Mantzavinos et al., 1996). Since it can achieve very high conversion rates, the wet air oxidation process typically requires much less space. Furthermore, no additional sludge or concentrated waste is produced as in the case of biological processes. WAO has been demonstrated to be a viable process for the treatment of desizing, scouring, dyeing and printing wastewater from the textile industry (Lei et al., 1997, 1998, 2000). WAO requires high temperatures (about 3008C) and high pressures (over 10 MPa), to achieve a high COD removal within a reasonable time scale. A suitable catalyst can be added to reduce the reaction temperature and pressure (Chu et al., 1998; Hu et al., 1999).
Because of the very stable structure of dyes, the first-order reaction kinetics model commonly used in the literature (Mishra et al., 1995; Ingale et al., 1996; Lei et al., 2000) does not fit our experimental data with the printing and dyeing wastewater. In this note, the first-order reaction kinetics model is modified by adding a fraction of non-oxidizable organics and used to study the WAO of printing and dyeing wastewater.
1.2 THEORY
There are many different organic compounds in the printing and dyeing wastewater including various dyestuffs. In this study, the total organic carbon (TOC) is used to represent the organic concentration in the printing and dyeing wastewater. The mass transfer resistance is negligible because oxygen is in excess, as demonstrated by Mantzavinos et al. (1996) and Lei et al. (2000). By assuming that the WAO follows the first-order reaction, we have
（1）
with the initial condition as
t=0; Y=Y0; （2）
where Y and Y0 are the oxidizable organic concentrations at reaction time t and zero, t is reaction time and k is the rate constant, which follows the Arrhenius equation:
（3）
with k0 being the pre-exponential factor, E the activated energy, R the gas constant and T the temperature.
The solution for equation (1) is
（4）
There are some components in the printing and dyeing wastewater which are non-oxidizable by WAO. Let a be the fraction of oxidizable organic among TOC, we have
(5)
where TOC0 is the TOC value at reaction time zero.
The TOC value at any time is
（6）
The total removal of TOC at any time is
（7）
where the initial TOC value of the wastewater, TOCi, is different from TOC0 because of the thermal decomposition of wastewater during the heating up period (Lei et al., 2000).
1.3 EXPERIMENTAL
WAO experiments were carried out in a 2-l autoclave equipped with a cooling coil and a magnetic stirring system. The equipment description and its operation procedures were available in our previous work (Lei et al., 1997). The wastewater was collected directly from the printing and dyeing process of one textile company in Hong Kong. It has a COD value of 11100 mg/l, TOC of 3204 mg/l, BOD5 of 440 mg/l and pH of 6.6.
1.4 RESULTS AND DISCUSSION
Figure 1 shows the TOC removal of printing and dyeing wastewater by WAO at four different temperatures, 150, 200, 250, and 3008C. The oxygen partial pressure is 2.65MPa (at a reference temperature of 2008C), which is twice the theoretical amount
of oxygen required to completely oxidize the organics in the wastewater. The experimental data are presented as symbols and the model fitting using the least-square method as solid lines. The TOC removal has a non-zero value at t