購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
墊板沖孔落料級進模設計
摘要：通過分析制件的工藝性可確定制件的成形加工需要一副模具完成。在這副級進模中，可以完成包括沖孔、落料兩道沖壓工序。首次沖孔采用始用擋料銷定位；落料采用固定擋料銷和導正銷定位。相對其他冷沖壓模具而言，它具有以下一些優點：
① 模具壽命較長；
②生產效率高；
③成本低。
關鍵詞：級進模、始用擋料銷、固定擋料銷、導正銷
Backing plate——Piercing and blanking
progressive die design
Abstract：backing plate——Piercing and blanking progressive die design .Through the analysis of the piece,make sure that one mold can produce the baking plate we need. In this progressive die,it includues piercing and blanking –two working procedures.When we first cut the hole,the work piece holded by starting stop ;when blanking ,the material are loated by the pilote and stop pin.Comparing to other press methods, it has some chracteristices fellowing:
First,the life of the mold is long ;
Second,the efficiency of the mold is high.
Third,the cost of the mold is low.
Keys words: progressive die; starting stop; the pilote ;stop pin.