【溫馨提示】壓縮包內含CAD圖有下方大圖片預覽，下拉即可直觀呈現眼前查看、盡收眼底縱觀。打包內容里dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，所見才能所得，請見壓縮包內的文件及下方預覽，請細心查看有疑問可以咨詢QQ：11970985或197216396
畢 業 設 計（論 文）外 文 參 考 資 料 及 譯 文
譯文題目：The introduction of the injection mold
注射模具的介紹
學生姓名： 學 號：
?！ I(yè)：
所在學院：
指導教師：
職 稱：
20xx年 1 月 31 日
The introduction of the injection mold
1.mold basic knowledge
1.1 introduction
There is a close relationship with all kinds of mold,which are refered to our daily production,and life in the use of the various tools and products,the large base of the machine tool,the body shell,the first embryo to a small screws,buttons,as well as various home appliances shell.Mold’s shape determine the shape of these products,mold’sprecision and machining quality determine the shape of these products too.Because of a variety of products ,appearance,specifications and the different uses,mold devide into Die Casting into the mould,die forging,die-casting mould,Die,and so on other non-plastic molds,as well as plastic mold.In recent years,with the rapid development of the plastics industry,and GM and engineering plastics in areas such as strength and accuracy of the continuous enhancement,the scope of the application of plastic products have also constantly expanded,such as:household appliances,instrumentation,
construction equipment,automotive,daily hardware,and many other fields,the proportion of plastic products is rapidly increasing.A rational design of plastic parts often can replace much more traditional metal pieces.The trend of industrial products and daily products plasticed is rising day after day.
1.2 Mold general definition
In the industrial production,with the various press and the special intruments which installed in the press,it produces the required shape parts or products through pressure on the metal or non-metallic materials,this special instruments collectively call as the mold.
1.3 Mold general classification
Mold can be divided into plastic and non-plastic mould:(1)Non-plastic mould:Die Casting,forging Die,Die,die-casting mould and so on.A Die Casting-taps,pig iron platformB.Forging Die-car body C.Die-computer panel D.Die Casting Die-superalloy,cylinder body(2)For the production technology and production ,the plastic mold are divided into different products:A.Injection molding die-TV casting,keyboard button(the most common application)B.Inflatable module-drink bottles C.Compression molding die-bakelite switches,scientific Ciwan dish D.Transfer molding die-IC products E.Extrusion die-of glue,plastic bags F.Hot forming die –transparent shell molding packaging G.Rotomoulding mode-Flexible toy doll.Injection Molding is the most popular method in plastics producing process.The method can be applied to all parts of thermoplastic and some of thermosetting plastics,the quantity of plastic production is much more than any other forming method.Injection mold as one of the main toolsof injection molding processing,whose production efficiency is low or high in the quality of precision、manufacturing cycle and the process of injection molding and so on,directly affect the quality of products,production,cost and product updates,at the same time it also determines the competiveness of plate which mass with the various component parts.It divided into:A molding device(Die,punch)B positioning system(I.column I set)C fixtures(the word board,code-pit)D cooling system(carrying water hole)E thermostat system(heating tubes,the hotline) F-Road System(jack Tsui hole,flow slot,streaming Road Hole)G ejection system(Dingzhen,top stick).
1.4 Type of mold
It can be divided into categories according to gating system with the different type of mold:(1)intake die :Runner and gate at the parting line,it well strip together with products when in the open mode,it is the most simple of design,easy processing and lower costing.So more people operations by using large intake system.(2)small inlet die:It general stay in the products directly ,but runner and gate are not at the parting line.Therefore,it should be design a multi-outlet parting line.And then it is more complex in the designing,more difficult in processing,generally chosing the small inlet die is depending on the product’s requirements.(3)hot runner die:It consists of heat gate,heat runner plate,temperature control box.Hot runner molds are two plate molds with a heated runner system inside one half of the mold.A hot runner system is divided into two parts:the manifold and the drops.The manifold has channels that convey the plastic on a single plane,parallel to the parting line,to a point above the cavity.The drops,situated perpendicular to the manifold,convey the plastic from the manifold to the part.The advantages of hot runner system:(1)No outlet expected,no need processing,the whole process fully automated,save time and enhance the efficiency of the work.(2)small pressure loss.
2.Injection Mold
There are many rules for designing molds.There rules and standard practices are based on logic,past experience,convenience,and economy.For designing,mold making,and molding,it is usually of advantage to follow the rules.But occasionally,it may work out better if a rule is ignored and an alternative way is selected.In some texts,the most common rules are noted,but the designer will learn only from experience which way to go.The designer must ever be open to new ideas and methods,to new molding and mold material that may affect these rules.The process consists of feeding a plastic compound in powdered or granular form from a hopper through metering stages and then injecting it into a mold.Injection molding process:Mold is a production of plastic tool.It consists of several parts and this group contains forming cavities.When it injects molding,mold clamping in the injection molding machine,melting plastic is injected forming cavities and cooling stereotypes in it,then it separate upper and lower die,it will push the production from the cavity in order to leave the mold through ejection system,finally mold close again and prepared the next injection.The entire process of injection is carried out of the cycle.
An injection on mold consists of at least two halves that are fastened to the two platens of the injection molding manchine so that can be opened and closed.In the closed position,the product-forming surfaces of the two mold halves define the mold cavity into which the plastic melt is injected via the runner system and the gate.Cooling provisions in the mold provide for cooling and solidification of the molded product so that it can be subsequently ejected.
For product ejection to occur,the mold must open.The shape of the molded product determines whether it can be ejected simply by opening the two mold halves or whether undercuts must be present.The design of a mold is dictated primarily by the shape of the product to be molded and the provisions necessary for product ejection.Injection-molded products can be classified as:
1).Products without undercuts.
2).products with external undercuts of lateral openings.
3).products with internal undercuts.
4).products with external and internal undercuts.
3. The composition of injection mold
3.1 Mold Cavity Space
The mold cavity space is a shape inside the mold,when the molding material is forced into this space it will take on the cavity space.In injection molding the plastic is injected into the cavity space with high pressure,so the mold must be strong enough to resist the injection pressure without deforming.
3.2 Number of Cavities
Many molds,particularly molds for larger products,are built for only one cavity space,but many molds,especially large production molds,are built with two or more cavities.The reason for this is purely economical.It takes only little more time to inject several cavities than to inject one.Today,most multicavity molds are built with a preferred number of cavities:2,4,6,8, 12, 16, 24, 32,48,64,96,128.These number are selected because the cavities can be easily arranged in a rectangular pattern,which is easier for designing and dimensioning,for manufacturing,and for symmetry around the center of the machine,which is highly desirable to ensure equal clamping force for each cavity.
3.3 Cavity and Core
By convention,the hollow portion of the cavity space is called the cavity.The matching,often raised portion of the cavity space is called the core.Most plastic products are cup-shaped.The does not mean that they look like a cup,but they do have an inside and an outside.The outside of the product is formed by the cavity,the inside by the core.Usually,the cavities are placed in the mold half that is mounted on the injection side,while the cores are placed in the moving half of the mold.The reason for this is that all injection molding machines provide an ejection mechanism on the moving platen and the products tend to shrink onto and cling to the core,from where they are then ejected.Most injection molding machines do not provide ejection mechanisms on the injection side.
For moulds containing intricate impressions,and for multi-impression moulds,it is not satisfactory to attempt to machine the cavity and core plates from single blocks of steel as with integer moulds.The cavity and core give the molding its external and internal shapes respectively,the impression imparting the whole of the form to the molding.
3.4 The Parting Line
To be able to produce a mold,we must have at least two separate mold halves,with the cavity in one side and the core in other.The separation between these plates is called the parting line,and designated P/L.Actually,this is a parting area or plane,but,by,cinvention,in this intext it is referred to as a line.The parting surfaces of a mould are those portion of both mould plates,adjacent to the impressions,which butt together to form a seal and prevent the loss of plastic material from the impression.The parting line can have any shape,many moldings are required which a parting line which lies on a non-planar or curved surface,but for ease of mold manufacturing,it is preferable to have it in one plane.The parting line is always at the widest circumference of the product,to make ejection of the product from the mold possible.With some shapes it may be necessary to offset the P/L,or to have it at an angle,but in any event it is best to have is so that it can be easily machined,and often ground,to ensure that it shuts off tightly when the mold is clamped during injection.If the parting line is poorly finished the plastic will escape,which shows up on the product as an unsightly sharp projection,which must then be removed;otherwise,the product could be unusable.There is even a danger that the plastic could squirt out of the mold and do personal danger.
3.5 Runners and Gates
Now,we must add provisions for bringing the plastic into these cavity spaces.This must be done with enough pressure so that the cavity spaces are filled completely before the plastic “freezes”(that is,cools so much that the plastic cannot flow anymore).The flow passage are the sprue,from wherethe machine nozzle contacts the mold,the runners,which distribute the plastic to the individual cavities,the wall of the runner channel must be smooth to prevent any restriction to flow.Also,as the runner has to be removed with the molding,there must be no machine marks left which would tend to retain the runner in the mould plate.And the gates which are small openings leading from the runner into the cavity space.The gate is a channel or orifice connecting the runner with the impression.It has a small cross-sectional area when compared with the rest of the feed system.The gate freezes soon after the impression is filled so that the injection plunger can be withdrawn without the probability of void being created in the molding by suck-back.
4.The injection molding machine process
Injection Mold is installed in the injection molding machine,and its injection molding process is completed by the injection molding machine.Following is the injection molding machine process.The molding machine uses a vacuum to move the plastic from the dryer to it’s initial holding chamber.This chamber is actually a small hopper on the back of the “barrel”of the machine.The barrel is where all the real work is done and it’s essentially a large screw housed in a heater which moves the plastic closer to the mold.As the screw turns,the plastic traverses the barrel and reaches a molten state.Only when it’s molten can it be injected into the mold with a rapid turn of the screw.As the chamber in front of the screw becomes filled,it forces the screw back,tripping a limit switch that activates a hydraulic cylinder that forces the screw forward and injects the fluid plastic into the closed mold.The gate freezes soon after the impression is filled so that the injection plunger can be withdrawn without the probability of void being created in the molding by suck-back.The tip of the barrel is called the ”nozzle” and from this point to the cavity in the mold the material is not heated and is constantly cooling.The “runner” is the cooled/set plastic that extends from the nozzle to the cavity and is process scrap.Actually,the cooled material from the nozzle to the mold is the “sprue” but it’s connected to the runner.There are ways around having sprues and runners,but it’s beyond the scope of what we’re talking about here.Most people have probably seen runners before and not realized it.The most likely place to see them are in model airplane/car kits as the individual components are left attached to the runner system.Typically the runners are ejected into a chute below the mold or else they will be picked out of the mold by a robotic arm and dumped into a regrinder.The regrinder chops the runners into bits and prepares them to be moved back into the dryer.
Though,once plastic has been heated,it degrades a bit and some molding processes will not allow for “regrind” to be mixed back in with virgin material as it can cause problems with the final part.In cases like this the regind is used elsewhere or it is discarded completely.Shrinkage plays a crucial role in molding and most plastic shrinks 20% as it cools.In order to combat this phenomenon in critical plastic pieces(not really toys)it is up the mold designer to build this factor into his design so that the finished parts will meet the original product design specifications. “Ejector pins” are part of the mold itself and are used to push the molded parts from the cavity once the mold is opened.The ejecting process is controlled by the molding machine.The molding cycle is basically “close-shoot-open-eject”.The mold is clamped into the machine with the front half remaining stationary(on the side of the machine)and the back half being the movable half.Also on this movable half are the ejector pins that push the molded parts from the cavity.The parting surfaces of a mould are those portion of both mould plates,adjacent to the impression,which butt together to form a seal and prevent the loss of plastic material from the impression.When all molds open up,the parts are stuck to the back half of the mold so that they can be ejected with the built-in pins.
These are related to the introduction of the injection mold.
注射模具的介紹
1.模具基本知識
1.1引言
我們?nèi)粘Ｉa(chǎn)、生活中所使用到的各種工具和產品，大到機床底座、機身外殼，小到一個胚頭螺絲、紐扣以及各種家用電的外殼，無不與模具有著密切的關系。模具的形狀決定著這些產品的外形，模具的加工質量與精度也就決定著這些產品的質量。因為各種產品的材質、外觀、規格及用途的不同，模具分為了鑄造模、鍛造模、壓鑄模、沖壓模等非射膠模具，以及射膠模具。近年來，隨著射料工業的飛速發展和通用與工程射料在強度和精度等方面的不斷提高，射料制品的應用范圍也在不斷擴大，如：家用電器、儀器儀表，建筑器材，汽車工業、日用五金等眾多領域，射料制品所占的比例正迅猛增加。一個設計合理的射料件往往能代替多個傳統金屬件。工業產品和日用產品射料化的趨勢不斷上升。
1.2模具的一般定義
在工業生產中，用各種壓力機和裝在壓力機上的專用工具，通過壓力把金屬或非金屬材料制出所需形狀的零件或制品，這種專用工具統稱為模具。
1.3模具的一般分類
可分為射膠模具及非射膠模具：（1）非射膠模具有：鑄造模、鍛造模、沖壓模、壓鑄模等。A.鍛造?！堫^、生鐵平臺 B.鍛造?！嚿?C.沖壓?！嬎銠C面板 D.壓鑄模——超合金，氣缸體 （2）射膠模具根據生產工藝和生產產品的不同又分為：A.注射成型模——電視機外殼、鍵盤按鈕（應用最普遍） B.吹氣?！嬃掀? C.壓縮成型模——電木開關、科學瓷碗碟 D.轉移成型?！呻娐分破?E.擠壓成型?！z水管、射膠袋 F.熱成型?！该鞒尚桶b外模 G.旋轉成型?！浤z洋娃娃玩具
注射成型是射料加工中最普遍采用的方法。該方法適用于全部熱射性射料和部分熱固性射料，制得的射料制品數量之大是其它成型方法望塵莫及的，作為注射成型加工的主要工具之一的注射模具，在質量精度、制造周期以及注射成型工程中的生產效率等方面水平高低，直接影響產品的質量、產量、成本及產品的更新，同時也決定著企業在市場競爭中的反應能力和速度。注射模具是由若干塊鋼板配合各種零件組成的，基本分為：A 成型裝置（凹模，凸模） B定位裝置（島主，導套） C固定裝置（工字板，碼?？樱?D冷卻系統（運水孔） E恒溫系統（加熱管，發熱線） F流道系統（唧咀孔，流道槽，流道孔） G頂出系統（頂針，頂棍）
1.4模具的類型
根據澆注系統型的不同可將模具分為三類：（1）大水口模具：流道及澆口在分模線上，與產品在開模時一起脫模，設計最簡單，容易加工，成本較低，所以較多人采用大水口系統作業。（2）細水口模具：流道及澆口 不在分模線上，一般直接在產品上，所以要設計多一組水口分模線，設計較為復雜，加工較困難，一般要視產品要求而選用細水口系統。（3）熱流道模具：主要由熱澆口套，熱澆道板，溫控電箱構成。熱流道模具是在一個半模有流道加熱系統的兩板式模具。熱流道系統分成兩個部分：分流板和噴嘴。分流板的通道將射料傳送到一個和分型線平行平面，這個平面在型腔的上面。噴嘴垂直于分流板安裝，把射料從分流板送進型腔。熱流道系統的優勢：（1）無水口料，不需要后加工，使整個成型過程完全自動化，節省工作時間，提高工作效率。（2）壓力損耗小。
2.注射模
設計模具有很多的規則。這些規則和標準的做法，都是基于邏輯，過往的經驗，方便性，經濟性。設計，模具制造，和成型，它通常的優勢就是遵循規則。但有時候，它可能會做出更好的，如果一項方法是被忽視和另一種方法被選擇。在一些書中，最普通的規則都會一一列出，而設計者設計的東西也僅僅是跟著以往的經驗走而已。設計者應該研究出新的想法和方法，來進行新的成型和選擇模具材料。
注射工藝過程就是從給料斗送進粉狀或顆粒狀的射料混合物，經過定量區和熔化區，然后將其注射到模具型腔中。注射過程說明：模具是一種生產射料制品的工具。它由幾組零件部分組成，這個組合內有成型模腔。注射時，模具裝夾在注射機上，熔融射料被注入成型模腔內，并在腔內冷卻定型，然后上下模分開，經由頂出系統將制品從模腔頂出離開模具，最后模具再閉合進行下一次注射，整個注射過程是循環進行的。
注射模至少是由裝在注射機的兩個壓板上的兩部分組成，以便可以開模和合模。在合模的時候，模具的兩板部分形成的產品成型表面是由射料熔體通過澆口和熱流道系統注入模具型腔形成的。模具中冷卻的原則是產品要在模具中冷卻和凝固，以便隨后可以脫模。
隨著產品注射的完成，模具就必須開模。產品的形狀決定著它是否由模具兩部分簡單地開?；蛴捎袀认蚍中蛠黹_模。模具的設計是由產品的形狀和產品開模的方式?jīng)Q定的。注射成型的產品可以分為以下幾類：
無側抽芯的產品
有側向開口的外側抽芯的產品
有內側抽芯的產品
有外側抽芯和內側抽芯的產品
3.注射模具的組成
3.1型腔空間
型腔空間是在模具中的一個形狀，當注射模的材料充滿這個空間的時候，它就會呈現出和型腔空間一樣的形狀。在注射成型時，射料是通過很高的壓力注射入型腔空間的，所以模具必須要足夠的堅固來抵抗注射的壓力，以防變形。
3.2型腔的數量
許多的模具，特別是較大產品的模具，僅僅只有一個模具型腔，但是也有許多的模具，特別是比較大型的模具，都會有2個或更多的型。究其原因就是它純粹的經濟性。它僅僅是注入多個型腔多花了一點時間。今天，大多數的模具型腔數量都是以這些數據為參考的：2,4,6,8,12,16,24,32,48,64,96，128。選擇這些數字（偶數）的原因是為了在長方形區域內布置型腔方便，這樣就有利于設計、定尺寸、加工制造和圍繞機器中心對稱，這種對稱分布對于保證每個型腔分配到相同的鎖模力非常重要。
3.3型腔和型芯
按照習慣，腔空間的中間部分稱為型腔。與型腔空間所匹配的部分稱為型芯。大部分射膠制品是杯形的。但這并不意味著它們看起來就是一個杯子，只是它們有一個內部和外部。產品的外部是由型腔形成的，而內部是由型芯組成的。通常情況下，型腔是位于注射一邊的那半模具上，而型芯是位于可以移動的那半模具上的。這樣安排的原因是注射機上的移動板有一個彈射裝置，而產品是收縮和包緊在型芯上的，然后產品就可以通過此來彈射出來。大部分的注射機在注射的一邊都不會安裝彈射裝置。
對于模具包含復雜型腔和型腔模具，試圖像整體模具那樣在一塊鋼板加工型腔和型芯是不讓人滿意的。型腔和型芯分別決定著成型的外部和內部形狀，而它們的整體決定著整個成型的方式。
3.4分模線
為了能夠生產出一個模具，我們必須具備有兩個分半的模具，一半裝型腔一半裝型芯。這兩個板分離時的部分叫做分模線，簡稱P/L。其實，這是一個分離的區域或面，但是為了方便，我們習慣叫它成一條線。模具的分型面是兩模板接近型腔的那些部分，它們對接一起形成油封并且避免型腔里射性材料的損失。分模線可以是任何形狀的，許多的注射成型都是要求分模線是不在同一平面或是曲面的，但是為了便于模具制造，最好設計在同一個平面上。為了能夠在模具上脫出產品，分模線總是分布在產品最寬的圓周區域。對一些形狀來說，設置分模線或其角度是非常有必要的，但是在任何情況下，都要有目的地讓它容易加工，以確保當注射的時候模具能夠緊緊地合在一起。如果分模線設計不好，射料將會溢出來，那樣產品就會有一個非常大的凹陷，那樣的產品肯定會被拆除，否則那樣的產品是不能夠使用的。甚至更危險的是，射料噴射進模具的時候，它會飛濺出傷害到人本身。
3.5流道和澆口
現在，增加介紹的是把射料從外面帶到型腔空間的裝置。在射料冷卻之前（也就是射料冷卻后不能再流動之前），它必須有足夠的壓力以便使射料能夠充滿型腔。流動的通道就是流道，它把注射機的噴嘴和模具連接了起來，流道是一個獨立的型腔，流道本身要光滑，以便可以阻止射料自由流動。同時，型腔被充滿后，澆口處先凝固，注射機螺桿抽回時可防止成型中的回流。澆口是一個小型的開口。與其他的進料系統相比，它有一個很小的橫截面積。在射料充滿型腔后，澆口很快就會冷卻，注射的噴嘴往后退，在模具退后的時候射料還是留有在噴嘴中的。
4.注射機的工作過程
注射模具是安裝在注射機上的，它的注射成型過程是由注射機來完成的。以下是注射機的工作過程：注射成型機通過抽真空把射料原料從干燥機吸到料斗里面。料斗實際上是一個小的漏斗，它被安裝在機臺料筒的后面。開始起實際作用的地方是料筒，料筒實質上是四周都是加熱器的一個很大的螺桿安放室，它把原料送向模具。隨著螺桿的旋轉，原料在料筒里前進并成為熔融狀態。只有完全熔融后，原料才會在螺桿高速旋轉產生的擠壓力下射進模腔。當螺桿前端壓室注滿射料時，螺桿被迫后退，斷開限位開關而開動液壓缸，從而向前推動螺桿，將熔融射料注射到閉合的模具型腔中。型腔被充滿后，澆口處先凝固，注射機螺桿抽回時可防止成型中的回流。螺桿端部稱為噴嘴，從這里開始直到模具型腔這段空間內，熔融材料沒有被加熱，并且一直處于被冷卻的狀態。流道水口料就是在噴嘴到模腔之間冷卻固化的射料，屬于工藝廢料。實際上，在噴嘴到模腔之間的冷卻射料是“主流道”，但它和流道是連在一塊的。有一些關于處理水口料的方法，但這不是我們這里要討論的。大多數人以前都見過流道，但卻沒有認出。最容易見到他們的地方是由單獨零件構成的飛機和汽車模型上，在這些零件上面一般都附著著流道系統。一般地，水口料被頂出，落進安放在模具下面的落料裝置（通過一個斜坡傳送通道），或者被機械手取出，然后投入粉碎機。粉碎機把水口料絞成碎料并送回干燥機。
盡管塑料一旦被加熱就會發生降解，而且有些成型工藝不允許碎料混入原材料里面，因為這樣會導致成品的缺陷。這種情況下水口料可以用到其他地方或者干脆不用。收縮在成型中影響深遠，大部分塑料冷卻后會收縮20%。為了在重點（關鍵）塑料零件上，當然不只是玩具一一克服這種現象，模具設計者必須把這個要素考慮到設計里面去，那樣成型出來的產品才能滿足設計規格。頂針是模具本身的零件，用來在模具打開的時候頂出產品。整個過程都有注射成型機控制。一個成型周期實際上就是合?！⑸洹_?！敵?。模具被鎖緊在機臺上，前模固定不動（在機臺的料筒側），后模則可以移動。上面說的頂針就是后模側。當模具打開，產品吸附在后模側以被頂出。
以上就是關于注射模具的相關介紹。