【溫馨提示】 dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，請見壓縮包內的文件及預覽，所見才能所得，請細心查看有疑問可以咨詢QQ：414951605或1304139763

哈爾濱工業大學華德應用技術學院畢業設計 摘要 本次設計課題來源于江蘇悅達專用車有限公司，主要根據總體結構設計的要求對垃圾車車廂和排出機構液壓系統進行了設計。車廂是垃圾車的重要部件之一，主要起裝載、運輸垃圾之用。運輸過程中，不良機構容易造成二次污染。根據設計要求，確定了廂體形狀和主要尺寸參數，重點考慮它的密封性；排出機構主要是用來排卸垃圾以及在垃圾裝載時提供一定的背壓力，使壓縮后的垃圾密度均勻；在設計過程中，首先計算液壓缸的外部載荷，然后根據結果計算出液壓缸的主要參數，進而一步步確定液壓系統中其他元件的參數。 關鍵詞：垃圾車；改裝車；上裝；壓縮式； Abstract This design topic is from Jiangsu Yueda Special Vehicles Co.,Ltd. According to the total design requirements, it is mainly aims at the garbage truck compartment and vehicle discharge mechanism design. The compartment is one of the important parts mainly for the loading, transportation trash. In the transport process, bad structure is easy to result in secondary pollution. According to the design requirements, the compartment’s shape and the main size are designed. However main focus into its undergo. The discharge mechanism is mainly used to provide the certain backpressure which compresses the garbage density evenly. In the design process, the hydraulic tank external load is first calculated. Then the main hydraulic tank parameters are calculated. Thus the following parameters are defined. Key words: garbage truck; modified cars; upload; compression type; II