1中文摘要三坐標數控銑床設計畢業設計是在原有普通銑床的基礎上,對其進行改造,成為三坐標數控銑床。該機床能通過三軸聯動,實現曲線直線等不同的加工路線。所設計的三坐標數控銑床,三個坐標方向的移動均由步進電機帶動,主軸電機采用交流電機,所有電機均由單片機進行控制。設計主要對數控銑床的機構進行設計,了解單片機的工作原理,主要有以下幾個方面:X、Y,Z 工作臺的傳動機構設計,主要是滾珠絲杠的運用;機床整體結構的設計,了解優缺點,充分考慮主要矛盾,擇優選?。粏纹瑱C(jī)控制系統的設計,進一步熟悉其應用。在數控機床系統中,加工精度和加工可靠性是伺服系統決定的,本文對普通銑床的數控化改造進行了分析和設計,通過對普通銑床的數控化改造,提高了普通銑床的加工能力和加工范圍,節省了直接購買機床的部分資金,具有很好的經濟效益。[關鍵詞] 銑床, 數控, 改造, 三坐標2英文摘要Three Coordinate NC Milling Machine DesignBasing on the common milling machine,this thesis reconstructs it and turns it to a NC milling with three coordinate.This reconstructed machine can realize cure line and straight line machining pathway by three axis linkage。The reconstructed milling machine movements along x,y,and Z are drove by step driver,the AC motor is used in principal axis. All above motors are controlled by single chip.This thesis focuses on designing the mechanism of the and mastering the single chip working principle. Which is including to the drive system design of X,Y,Z workbench , the whole machine construction design and the control system design of single chip. In a NC machine tool system, the precision and reliability of the machine tool depend on the serve system. Through the reconstructing ,analyzing and designing of a common milling machine serve system, the machining ability can be improved ,and a big sum money may be saved, the company will benefit from it.[Keywords] Milling Machine, NC , Reconstruct, Three Coordinate3目錄中文摘要 . 1英文摘要 . 2目錄 . 3前言 . 1第 1 章 概論 . 21.1 數控機床的產生及發展 21.2 數控機床的組成及分類 21.3 數控機床的特點及應用范圍 .4第 2 章 設計主要參數及基本思想 52.1 課題要求 52.2 設計原則 52.3 總結構設計 5第 3 章 立式數控銑床的設計和計算 83.1 主傳動系統的設計 . 83.2 主軸系統計算 113.3 進給伺服系統的設計 133.4 進給傳動的計算 15第 4 章 微機控制系統的設計 .254.1 微機控制系統組成及特點. 254.2 微機控制系統設備介紹 254.3 程序部分 29致 謝 . 33參考文獻 . 34